System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Comparing Volume Group properties among HPUX11iv1, v2 and v3.

senthil_kumar_1
Super Advisor

Comparing Volume Group properties among HPUX11iv1, v2 and v3.

Dear All,

 

I have worked on HPUX 11.11...So I am femiliar with that....I have some doubts on VG properties.

 

 

1)In hpux 11.11, PV size can be maximum 2TB (With PE size 32 MB and No of PEs 65536), Is it changed in 11.23 and 11.31?

 

2)In hpux 11.11, If a VG is created with 100GB Physical disk, then all other physical disks in that VG size should be also 100GB, If we are adding a phyical disk with more than 100GB to that VG, then only 100GB will be taken. Is it changed in 11.23 and 11.31?

 

3)What is difference between VG version 1.0 and 2.0?

 

4)Which version of HPUX OS are supporting VG 1.0?

 

5)Which version of HPUX OS are supporting VG 2.0?

 

6)Advantages of VG 2.0?

 

1 REPLY
Torsten.
Acclaimed Contributor

Re: Comparing Volume Group properties among HPUX11iv1, v2 and v3.

Get the LVM supported limits and the admin guide from here

 

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&prodClassId=10008&contentType=SupportManual&docIndexId=64255&prodTypeId=18964&prodSeriesId=4296010

 

this will answer all of your questions.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!