Configuring SAN storage in RHEL5

[Rohit Nagare]

Good Morning friends,

I Have installed Red Hat Enterprise Linus 5 32 bit on HP blade server HP ProLiant BL460c
after the installation complete i need to mount SAN storage in the same. I have updated
HBA Card drivers

Thanks in advance

[Michal Kapalka (mikap)]

hi,

connect the blade server to the SAN,
create zones between storage and your server.
the procedure how to access the SAN lun's from storage its depend on your storage.

mikap

[Rohit Nagare]

Hi Michal

I have connected SAn storage through HBA card and created the zone.
can you help me in steps to configure same on RHEL5



Rohit

[Michal Kapalka (mikap)]

hi,

ok could you please send what type/model of Storage do you have ??

for example :

EMC / Symmetrix / DMX2000
EMC / Clariion cxX00
HP / XP(EVA)

.....

mikap

[Rohit Nagare]

its
HP / (EVA)

[Michal Kapalka (mikap)]

hi,

this is a link where is a described procedure hot to connect RHEL + HP EVA :

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1262935258575+28353475&threadId=1397932

hope it will be helpfull for you.

mikap

[Rohit Nagare]

hi friends,

Thanks for all ur support actuly the zone was not configured for SAN storage using VMware.after configuring proper zone i was able to fine SAN disk and able to acces it.

Thanks
Rohit

[Michal Kapalka (mikap)]

Hi Rohit,

the next time you could asign points !!!.

How Do I Assign Points?

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

mikap