HPE Community
Operating System - Linux
1753274 Members
4776 Online
108792 Solutions
New Discussion

Re: Connecting Red Hat 5.3 to EVA 8100 vdisk

 
SOLVED
Go to solution
J Borgia
Advisor

‎10-06-2009 05:28 AM

‎10-06-2009 05:28 AM

Re: Connecting Red Hat 5.3 to EVA 8100 vdisk

I tried to enter the mpath1 device into the fstab as you described, but it also failed. I had to fix the fstab again after reboot. When I did, I logged back in and looked into /dev/mapper and noticed that mpath1 was now replaced with the alias I set in the multipath.conf file: frydata1. I was able to manually mount /dev/mapper/frydata1 to /mnt, so I decided to give this a try in fstab. This seemed to work.

After two reboots, it automatically now mounts my SAN disk with that device alias in the fstab.

Thanks for the help all.
0 Kudos
J Borgia
Advisor

‎10-06-2009 07:03 AM

‎10-06-2009 07:03 AM

Re: Connecting Red Hat 5.3 to EVA 8100 vdisk

Thanks everyone for your help with this.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.