Console display no login prompt

[HP-UX admin]

After logging on Console when I typed any command its getting Override & when I give Clear command it is not Clearing display.For that I treid to load default setting of Console by Pressing d & Power on button.
Now after that no login promt on console.Just Cursor blinks on Console & even no MP login after Ctrl+b.
I am able to get login prompt using telnet but not on Console.
thanks in advance.

[Steven E. Protter]

Shalom HP-UX admin,

A few possibilities spring to mind.

1) The serial console is dead.
2) The other console needs Ctrl - escape sequence displayed to be entered on keyboard to be functional.
3) MP card requires a reset.

SEP

[RAC_1]

Is console process running? Else do init q

[Victor Fridyev]

Hi,

Try to reset console as described in http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1048974

HTH

[SR_2006]

Dear all,
Can GSP reset using command will effect on online system.Also How to manually reset it.Also can connect another Console monitor mean where this configuration information stored.

thanks.

[HP-UX admin]

thanks