DS15, Not booting.

[shashi kanth]

One of my DS15 box is not booting. When the box is booting, i am getting the bellow error. Any one tell me what could be the problem ?


*** keyboard not plugged in...
1280 Meg of system memory
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
probing PCI-to-PCI bridge, hose 0 bus 2
bus 0, slot 9 -- ewa -- DE500-BA Network Controller
bus 0, slot 11 -- ewb -- DE500-BA Network Controller
bus 0, slot 13 -- dqa -- Acer Labs M1543C IDE
bus 0, slot 13 -- dqb -- Acer Labs M1543C IDE
bus 0, slot 14 -- pka -- NCR 53C895
bus 2, slot 4 -- pkb -- NCR 53C895
bus 2, slot 5 -- eia -- DE600-AA
bus 2, slot 6 -- vga -- Permedia - P2V Graphics Controller
bus 0, slot 16 -- pga -- FCA-2354
initializing GCT/FRU at 3ff42000

Error detected by Pchip 0
PERROR = 0070bff6f4680005
Lost Error
PERR

[Kapil Jha]

Its probably a hardware error , because OS has not started to boot as of now.
So place a case with HP to check hardware.

BR,
Kapil

[Ivan Ferreira]

Over the years, the failing component that caused most critical errors is memory.

Call for hardware support, and ask them to start checking the memory.

[Sri_10]

Alternately (not a real/good solution, but something to try ..): Move the FCA-2354 card from the higher number slot to a lower number slot in the system in order to troubleshoot.

But, hardware call logged to your support vendor is the right thing!

Thanks
Sri