1753906 Members
9176 Online
108810 Solutions
New Discussion юеВ

Re: DVD HW path changed

 
SOLVED
Go to solution
Kranti Mahmud
Honored Contributor

DVD HW path changed

Dear all,

My test server (rx2660) has 2 IR volume disk & a DVD which is working fine. After updating OS from version 2 to version 3, the DVD rom HW path has been changed. How to get the normal HW path? Please find the attached as the output.

Rgds-Kranti
Dont look BACK as U will miss something INFRONT!
3 REPLIES 3
sujit kumar singh
Honored Contributor

Re: DVD HW path changed

Hi
DVD ROM is being sensed as USB device. You scan use that device file only as you can see the RAW as well as the Block Device Files.

REgards
Sujit

Re: DVD HW path changed

Read this WP thoroughly,

http://docs.hp.com/en/16213/UpdatetoUSBDriverSupportonHPUX11iv3.pdf

Then download and install the new drivers from here:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=USB2

HTH

Duncan

I am an HPE Employee
Accept or Kudo
Torsten.
Acclaimed Contributor
Solution

Re: DVD HW path changed

This is the device file using the old USB driver in 11.31:

/dev/deviceFileSystem/Usb/MassStorage/dsk/disk@hp-1008+294=A60020000001

You need to uninstall this driver version and update to the newer version (see link above!).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!