HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

DVD HW path changed

 
SOLVED
Go to solution
Kranti Mahmud
Honored Contributor

DVD HW path changed

Dear all,

My test server (rx2660) has 2 IR volume disk & a DVD which is working fine. After updating OS from version 2 to version 3, the DVD rom HW path has been changed. How to get the normal HW path? Please find the attached as the output.

Rgds-Kranti
Dont look BACK as U will miss something INFRONT!
3 REPLIES
sujit kumar singh
Honored Contributor

Re: DVD HW path changed

Hi
DVD ROM is being sensed as USB device. You scan use that device file only as you can see the RAW as well as the Block Device Files.

REgards
Sujit

Re: DVD HW path changed

Torsten.
Acclaimed Contributor
Solution

Re: DVD HW path changed

This is the device file using the old USB driver in 11.31:

/dev/deviceFileSystem/Usb/MassStorage/dsk/disk@hp-1008+294=A60020000001

You need to uninstall this driver version and update to the newer version (see link above!).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!