Operating System - Tru64 Unix
1753508 Members
4874 Online
108795 Solutions
New Discussion юеВ

Re: Digital Unix 5.0 issues SCSI errors i am not sure what they are

 
whiteSox
Frequent Advisor

Re: Digital Unix 5.0 issues SCSI errors i am not sure what they are

what log files will tell me what is going on ..what log files should i be looking for the server came back up ...and i am trying to understand what is going on ....Thanks for your help ..
cnb
Honored Contributor

Re: Digital Unix 5.0 issues SCSI errors i am not sure what they are

Check the error log.

DecEvent is used for error log translation for AS2000 systems. If it isn't installed then uerf may give you an idea of what is going on.

# man dia

-or-

# man uerf

Since both scsi id 0 and 2 are the ones logging events, and they are the only WIDE devices on the bus. Logic would indicate investigate those devices first.

"psiop_hardintrptidec5..." > Controller Hard interrupt

Depending upon controller, controller firmware and disk drive firmware, these wide devices may not play well on a narrow scsi chain. In addition, as stated earlier, the timeout could also be from anything on scsi bus 0.

If you're not comfortable troubleshooting/investigating this, place a call to your service provider.

hth
whiteSox
Frequent Advisor

Re: Digital Unix 5.0 issues SCSI errors i am not sure what they are

does any one know what this error event means ..
----- EVENT INFORMATION -----

EVENT CLASS ERROR EVENT
OS EVENT TYPE 199. CAM SCSI
SEQUENCE NUMBER 23.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Thu Jul 2 05:03:51 2009
OCCURRED ON SYSTEM xyzzzz
SYSTEM ID x00050009 CPU TYPE: DEC 2100
SYSTYPE x00000000
PROCESSOR COUNT 2.
PROCESSOR WHO LOGGED x00000001

----- UNIT INFORMATION -----

CLASS x0022 DEC SIM
SUBSYSTEM x0000 DISK
BUS # x0000
x0000 LUN x0
TARGET x0
whiteSox
Frequent Advisor

Re: Digital Unix 5.0 issues SCSI errors i am not sure what they are

cnb,

The server was running for about 4 to 5 years with the same configuration .Do you know what that error event means ..is there a problem with the mother board or the disk drives ?
cnb
Honored Contributor

Re: Digital Unix 5.0 issues SCSI errors i am not sure what they are

Something in the disk subsystem. Disk 0 is still reporting *some* event. Not enough information here.

Read the guides and install DecEvent to get a more thorough description of what is going on.

http://h18000.www1.hp.com/support/svctools/decevent/index.html

FWIW: There's a lot more to this system than a "Motherboard" and disks. System Module, CPU modules, Memory modules, Bridge, I/O, etc...
http://h18000.www1.hp.com/alphaserver/archive/2000/2000_tech.html
whiteSox
Frequent Advisor

Re: Digital Unix 5.0 issues SCSI errors i am not sure what they are

Does any one know if this OS is supported by HP ?.
Rob Leadbeater
Honored Contributor

Re: Digital Unix 5.0 issues SCSI errors i am not sure what they are

Hi,

5.0 hasn't been supported for a long time:

http://h30097.www3.hp.com/pdf/FINAL_Tru64UNIX_Policy_Page_24March2009.pdf

You might want to post the output of "sizer -v" so we can see exactly what version you're running...

Cheers,

Rob

P.S. Please remember to assign points to replies...