Disk failure

[techm_1]

Dera experts,

Please help in reading H/w address of failed drive
===================
Event data from monitor:

Event Time..........: Wed Dec 15 22:07:42 2010
Severity............: CRITICAL
Monitor.............: disk_em
Event #.............: 100872
System..............: dhpcdbm1.edc.cingular.net

Summary:
Disk at hardware path 64000/0xfa00/0x100 : Hardware failure

how to read above h/w address?

Thanks and regards
Rahul

[rajesh_32]

Try this.
ioscan o/p
==========
disk 17 64000/0xfa00/0xa esdisk CLAIMED DEVICE TEAC DV-28E-N
/dev/disk/disk17 /dev/rdisk/disk17

# ioscan -funNCdisk |grep -i "64000/0xfa00/0xa"
disk 17 64000/0xfa00/0xa esdisk CLAIMED DEVICE TEAC DV-28E-N

See the 17 means /dev/disk/disk17

Rgds.

[S_Logan]

Hi Rahul,


This is Vitual Hardware Addressing in 11.31,

One of the External Storage LUN has some issue!


Please checking this link:

http://docstore.mik.ua/manuals/hp-ux/en/5992-4580/ch03s03.html

Search for "virtual hardware address"

You can decode the Disk at hardware path 64000/0xfa00/0x100 .

HTH,
Regards,
Surendar
Note: If you are the author of this question and wish to assign points to any of the answers, please login and assign points.
For more information on assigning points ,click here :
http://forums11.itrc.hp.com/service/forums/helptips.do

[Ismail Azad]

Hi,

This is a feature that is inbuilt with the agile addressing method where the virtual root node and virtual bus are universal. That is why you will always see 64000 and 0xfa00 for all virtualized hardware addresses. The only thing that changes is the last field which is generated by the kernel (0x100).

If you want to see the corresponding legacy or agile "lunpath" hardware path execute

ioscan -m hwpath

Regards
Ismail Azad

[Torsten.]

Here is an example:

$ ioscan -m hwpath
Lun H/W Path Lunpath H/W Path Legacy H/W Path
====================================================================
64000/0xfa00/0x0
0/4/1/0.0x5000c50001234567.0x0 0/4/1/0.0.0.1.0



Use also

# ioscan -fN

or

# ioscan -fnkNCdisk