Display issue

[pratapvfr]

Hello I am using putty, and doing login to hpux system using telnet port 22, after login i tried to open sam but it can only open in terminal version mean not graphical, i tried to do export display also tried to do x11 forwarding enable but it doesnt work, any body having any idea for this full poing for correct answer,

[Johnson Punniyalingam]

showing or posting actual errors, can give much picture of the problem

can you check simple command like

once your export display

# xclock &

[Kapil Jha]

did you tried any software like hummingbird,Xmanager you can not just export display and think it would open from your putty session.

Get some software and try it out, there is nothing wrong in what you doing just missing one big point :)

BR,
Kapil+

[Steven Schweda]

> [...] I am using putty, [...]

Which "putty"? On _what_?

> [...] using telnet port 22 [...]

Do you mean using SSH?

> [...] but it can only open in terminal
> version mean not graphical, [...]

echo $DISPLAY

> [...] i tried to do export display [...]

How, exactly?

> [...] also tried to do x11 forwarding
> enable [...]

How, exactly?

> [...] but it doesnt work,

"It doesn't work" is not a useful problem
description. It does not say what you did.
It does not say what happened when you did
it.

Showing actual commands with their actual
output can be more helpful than vague
descriptions and interpretations.

> did you tried any software like [...]

Which X server software have you installed?
Did you start it?

[Leonard C.]

You can use some X packages like XManager on your client (Windows)

The run XPassive

Connect to your HP-UX server with putty (Telnet os SSH)

Set DISPLAY variable to IP of your client:
#export DISPLAY=IP_of_client:0.0

To check X availability :
#xclock

Then you run sam in graphical mode:
#sam

[Tingli]

Do you have Xming running in your Window? You can down load it from Web and install it. Of course you need to start it too. When you have X11 forwarding enabled, you shouldn't set any export display as the Display already set up as localhost:10.0 for you when you login.

Also, you can not su to any other account otherwise it won't work either.

[pratapvfr]

i will try with Xming, which is good site to download this software, please advice,

[pratapvfr]

I have installed xming, and done export DISPLAY=ip_client:0.0
it doesnt help me i am having error

Xlib: connection to "IP_address:0.0" refused by server
Xlib: No protocol specified

Error: Can't open display: IP_address Error: Couldn't find per display information

i am using telnet not ssh to hpux 11 server, any clue,

[Johnson Punniyalingam]

http://www.downloadatoz.com/web-authoring_directory/xming/download.html

http://www.downloadatoz.com/web-authoring_directory/xming/

[Horia Chirculescu]

Hello,

Please read this thread:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1412280

My last post is about setting access control.

Horia.