System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

EMS problem - No resource instances of /system/filesystem/availMb/

SOLVED
Go to solution
Azamat
Frequent Advisor

EMS problem - No resource instances of /system/filesystem/availMb/

Hello folks,
system - SuperDome SX2000
OS - HPUX11.31

We have some problems with adding request into EMS, after changing snmp trap destination in the /etc/snmpd.conf
SAM - > Event Monitoring Services -> add request ->
And when we trying to add lan or FS available capacity, there is no instance "No resource instances of /system/filesystem/availMb/" ; "No resource instances of /net/interfaces/lan/status"

Also I`ve tried to do next steps for resolving this issue:
On the host where issue with creating requests
Stopping SNMP and EMS
# /sbin/init.d/emsa stop
emsagent stopped
# /sbin/init.d/SnmpHpunix stop
# /sbin/init.d/SnmpMaster stop
snmpdm stopped

Start SNMP and EMS
# /usr/sbin/snmpd
# /sbin/init.d/SnmpMaster start
# /sbin/init.d/SnmpHpunix start
# /sbin/init.d/emsa start
3 REPLIES
Azamat
Frequent Advisor

Re: EMS problem - No resource instances of /system/filesystem/availMb/

Hello folks,
system - SuperDome SX2000
OS - HPUX11.31

We have some problems with adding request into EMS, after changing snmp trap destination in the /etc/snmpd.conf
SAM - > Event Monitoring Services -> add request ->
And when we trying to add lan or FS available capacity, there is no instance "No resource instances of /system/filesystem/availMb/" ; "No resource instances of /net/interfaces/lan/status"

Also I`ve tried to do next steps for resolving this issue:
On the host where issue with creating requests
Stopping SNMP and EMS
# /sbin/init.d/emsa stop
emsagent stopped
# /sbin/init.d/SnmpHpunix stop
# /sbin/init.d/SnmpMaster stop
snmpdm stopped

Start SNMP and EMS
# /usr/sbin/snmpd
# /sbin/init.d/SnmpMaster start
# /sbin/init.d/SnmpHpunix start
# /sbin/init.d/emsa start

thank in advice!
Hakki Aydin Ucar
Honored Contributor
Solution

Re: EMS problem - No resource instances of /system/filesystem/availMb/

Hi

Can you see the resources available that you wanted:

# resls /
Contacting Registrar on igui01

NAME: /
DESCRIPTION: This is the top level of the Resource Dictionary
TYPE: / is a Resource Class.

There are 7 resources configured below /:
Resource Class
/system
/StorageAreaNetwork
/adapters
/connectivity
/cluster
/storage

Like this ;

# resls /storage
Contacting Registrar on igui01

NAME: /storage
DESCRIPTION: Storage Resources
TYPE: /storage is a Resource Class.

There are 2 resources configured below /storage:
Resource Class
/storage/events
/storage/status

and then go to config;

# /etc/opt/resmon/lbin/monconfig

select snmp there..
Azamat
Frequent Advisor

Re: EMS problem - No resource instances of /system/filesystem/availMb/

there is only one solution: restart server