Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

EMS won't stop sending alerts

Vince Laurent
Respected Contributor

EMS won't stop sending alerts

A few days ago we got an EMS notice on a power supply.  HP came out and changed it out.  We still get alarms on the old issue.  How do we stop it?

 

CURRENT MONITOR DATA:

Event Time..........: Thu Mar 20 02:50:50 2014
Severity............: CRITICAL
Monitor.............: ia64_corehw
Event #.............: 103001
Summary:

     Power Supply : Failure is detected.

.

.

.

Event Details :

     Event Date  ...................: Mon Mar 17 13:49:07 2014
     Sensor Number .................: 0x41
     Sensor Type ...................: Power Supply

 

We are running HP-UX 11.31 on an RX6600.

2 REPLIES
Patrick Wallek
Honored Contributor

Re: EMS won't stop sending alerts

You  have to clear the EMS events.  Try this:

 

To show what EMS currently sees as down:

 

# /opt/resmon/bin/set_fixed -L

 

To clear all EMS "down" items:

 

# /opt/resmon/bin/set_fixed -n \*

Highlighted
Vince Laurent
Respected Contributor

Re: EMS won't stop sending alerts


Patrick Wallek wrote:

To show what EMS currently sees as down:

 

# /opt/resmon/bin/set_fixed -L

When I did this, as suggested by another posting, there  was nothing "down" and nothing "cleared" and we got the message the next day anyway.