cancel
Showing results for 
Search instead for 
Did you mean: 

EMS

 
RajuD
Frequent Advisor

EMS

How to check configured value in EMS

For example:

i have filesystem /backup, i want to know what is filesystem threshold has been configured.

i am not getting the desired output while executing the below command

# resls /system/filesystem/availMb/backup
# /etc/opt/resmon/lbin/monconfig
“Education is our passport to the future, for tomorrow belongs to those who prepare for it today.”
3 REPLIES
Torsten.
Acclaimed Contributor

Re: EMS

AFAIR you can use SAM to configure EMS or emscli.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Johnson Punniyalingam
Honored Contributor

Re: EMS

Hi Rajesh,

How to check configured value in EMS

EMS alerts for only Hardware related issue you will recive ' EMS alerts in your syslog,

>>i have filesystem /backup, i want to know what is filesystem threshold has been configured.<<

You need check "wether you have any File system montoring software has been Installed?

or you can look for automated Health Check script which will send you email alerts realted to you file system alerts

Hope you understand,

Thx,
JOhnson

Problems are common to all, but attitude makes the difference
RajuD
Frequent Advisor

Re: EMS

Thanks torsten and Johnson i got the required one.Thanks torsten and Johnson
“Education is our passport to the future, for tomorrow belongs to those who prepare for it today.”