cancel
Showing results for 
Search instead for 
Did you mean: 

EVA disk i/o error

SOLVED
Go to solution
Aitor Zaldua
Occasional Advisor

EVA disk i/o error

hi!

I just change my old HSG80 by an EVA3000, but when i try to configure the disk with "disklabel" the system give me an error:

1.- hwmgr scan scsi ... ok
2.- hwmgr view device:
...
95: /dev/cport/scp0 HSV200 bus0-targ0-lun0
..
3.- disklabel -z /dev/cport/scp0
/dev/cport/scp0: I/O error
¿¿¿???
What can i do to solve this?

thanks in advance!
4 REPLIES
Rob Leadbeater
Honored Contributor
Solution

Re: EVA disk i/o error

Hi,

The device you are trying to label is the SCSI control port, not one of the LUNs from the EVA.

You should see the LUNs as /dev/disk devices in the output of hwmgr view device.


Hope this helps,

Regards,

Rob
Aitor Zaldua
Occasional Advisor

Re: EVA disk i/o error

Thank you by your quick response!

It seems that the error is on the EVA configuration... thanks a lot, i still don´t close the case but i think i´m in the correct way,

regards,

Re: EVA disk i/o error

# hwmgr view device -cat disk
would list all your disks...

You can also run the following to filter only EVA disks;
# hwmgr view device -cat disk | grep HSV
Aitor Zaldua
Occasional Advisor

Re: EVA disk i/o error

Thank you, the problem finally was in the EVA but the "/dev/rcp" confused me,

regards,