Error Log

[Daniel Duarte]

Please, All

When I run (TAR XVF SHCTRU64V4-V351-build606.tar) the hardware entry in Halt.
Show in console these messages.
Too Many processor correct error detected on CPU0.
Machine Check processor error Abort
Machine Fatal Error 0x100000098

Verify error log (binary.errlog) the show results.
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 2.
Timestamp of occurrence 05-APR-2004 15:38:33
Host name ds10

System type register x00000022 Systype 34. (Regatta Family)
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000000

Event validity 1. O/S claims event is valid
Event severity 5. Low Priority
Entry type 310. Time Stamp
-1. - (minor class)

stdin: END
scsi2 at itpsa0 slot 0
rz16 at scsi2 target 0 lun 0 (LID=1) (COMPAQ BD0366459B B016)
(Wide16)
rz17 at scsi2 target 1 lun 0 (LID=2) (COMPAQ BF01864663 3B0B)
(Wide16)
Created FRU table binary error log packet
lvm0: configured.
lvm1: configured.
kernel console: ace0
dli: configured
ATM Subsystem configured with 1 restart threads
ATM IFMP: configured
i2c: Server Management Hardware Present
ATMUNI: configured
ATMSIG: 3.x (module=uni3x) configured
ILMI: 3.x (module=ilmi) configured
ATM IP: configured
ATM LANE: configured.

I already re-did memory bank, although I still having the same problem.

Thank you in advance for any HELP.

Daniel Duarte

[Michael Schulte zur Sur]

Hi,

please reseat the cpu(s),

greetings,

Michael

[Daniel Duarte]

The equipament that I'm using is DS10, and de processor is fixed on the motherboard.

[Michael Schulte zur Sur]

Oops,

I hope, you have a maintenance contract, cause it may be the cpu.

do you have decevent?
You are running 4.0X, right?

hth,

Michael

[Daniel Duarte]

Michael

I'm not sure that it's realeted with CPU.
The error show when I run the command tar in a file greater than 30 MB.
I have garantee in hardware, that I must have sure before open a ticket.
I have DecEvent, any command in special?

Daniel Duarte

[Michael Schulte zur Sur]

Hi,

use dia -R
to see the details of the error
Could you post that?

In my oppinion it is either cpu or memory.
Please open a call.

greetings,

Michael

[Daniel Duarte]

Michael

I was running TEST in the HALT prompt and this error message appear.

Machine Check Logout Frame @ 0x6000 code = 0x86

Alpha 21264 iprs (cpu0):
...
Processor corrrectable error througth vector 630

Attached is file uerf.tst

Thanks

[Michael Schulte zur Sur]

Hi,

you don't seem to have the dia command, right? I would open a call with HP. This is occurring to often to garuantee you a good and safe performance.

greetings,

Michael

[Daniel Duarte]

Michael

Excuse me, following is attached in file dia.tst.

Only last events.

Thanks

[Michael Schulte zur Sur]

Daniel,

unfortunately the panic was not in that listing. I could just see the last boot and configuration. can you please try again?
Just entries with errors.

thanks,

Michael