Operating System - HP-UX
1745786 Members
3946 Online
108722 Solutions
New Discussion

Re: Error rx2660 reset Alert Level 7

 
SOLVED
Go to solution
Robert_Jewell
Honored Contributor
Solution

Re: Error rx2660 reset Alert Level 7

So it looks like when the HPMC/MCA occurred it was due to the loss of that IO bridge adapter.  The card is still functioning as there are multiple bridge adapters (ropes) to that slot.

It appears to be a problem with the slot, which means a bad system board for this model.  It could still possibly be a card issue though, so if you have a spare P800 its a lot easier to try and replace it than it would be a new system board.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
transardo
Occasional Advisor

Re: Error rx2660 reset Alert Level 7

If I understood, the most correct would replace the P800.
Unfortunately we have no other for testing.

I will try maintain this one running until is possible.

Thanks for help.