Operating System - HP-UX
1748156 Members
4205 Online
108758 Solutions
New Discussion юеВ

Re: Error when mount DVD I/O error in HPUX 11.31

 
SOLVED
Go to solution
mohd280
Advisor

Error when mount DVD I/O error in HPUX 11.31

Hi ,

 

 It is very simple but not working !!!!

 

 

======================================

 

# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
disk 0 0/0/0/1/0/0/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d0 /dev/dsk/c0t0d0s2 /dev/rdsk/c0t0d0 /dev/rdsk/c0t0d0s2
/dev/dsk/c0t0d0s1 /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s1 /dev/rdsk/c0t0d0s3
disk 1 0/0/0/1/0/0/0.0.1 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d1 /dev/rdsk/c0t0d1
disk 2 0/0/0/31/2.0.0 sdisk CLAIMED DEVICE hp DVD A DS8A8SH
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
#
# mount -F cdfs /dev/dsk/c1t0d0 /DVD
/dev/dsk/c1t0d0: I/O error
#

 

 

================================

 

Thank you in advance. 

5 REPLIES 5
Bill Hassell
Honored Contributor
Solution

Re: Error when mount DVD I/O error in HPUX 11.31

Put an HP-UX CD or DVD in and try again. HP-UX understands only a few CD/DVD formats.



Bill Hassell, sysadmin
Ajin_1
Valued Contributor

Re: Error when mount DVD I/O error in HPUX 11.31

Hi
May be its Drive Problem.Also please check the mount point also
Thanks & Regards
Ajin.S
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Torsten.
Acclaimed Contributor

Re: Error when mount DVD I/O error in HPUX 11.31

It may depend on the CD/DVD format.

Why not try to mount the ISO?

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=ISOIMAGE-ENH

 

 

Depending on your server hardware you may also try virtual media (mount the media over ILO).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Robert_Jewell
Honored Contributor

Re: Error when mount DVD I/O error in HPUX 11.31

Something else to be sure is that your mount point isnt being accessed.  I ran into a similar issue and found that the mount point I was trying to use was currently being exported.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
mohd280
Advisor

Re: Error when mount DVD I/O error in HPUX 11.31

Thank you all . The DC guy said DVD is there while apparently not .

It was DVD not inserted ! sorry for someone mistake :)