Error when mount DVD I/O error in HPUX 11.31

[mohd280]

Hi ,

 It is very simple but not working !!!!

======================================

# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
disk 0 0/0/0/1/0/0/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d0 /dev/dsk/c0t0d0s2 /dev/rdsk/c0t0d0 /dev/rdsk/c0t0d0s2
/dev/dsk/c0t0d0s1 /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s1 /dev/rdsk/c0t0d0s3
disk 1 0/0/0/1/0/0/0.0.1 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d1 /dev/rdsk/c0t0d1
disk 2 0/0/0/31/2.0.0 sdisk CLAIMED DEVICE hp DVD A DS8A8SH
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
#
# mount -F cdfs /dev/dsk/c1t0d0 /DVD
/dev/dsk/c1t0d0: I/O error
#

================================

Thank you in advance. 

[Bill Hassell · Accepted solution]

Put an HP-UX CD or DVD in and try again. HP-UX understands only a few CD/DVD formats.

[Ajin_1]

Hi
May be its Drive Problem.Also please check the mount point also

[Torsten.]

It may depend on the CD/DVD format.

Why not try to mount the ISO?

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=ISOIMAGE-ENH

Depending on your server hardware you may also try virtual media (mount the media over ILO).

[Robert_Jewell]

Something else to be sure is that your mount point isnt being accessed.  I ran into a similar issue and found that the mount point I was trying to use was currently being exported.

-Bob

[mohd280]

Thank you all . The DC guy said DVD is there while apparently not .

It was DVD not inserted ! sorry for someone mistake :)