Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Error when mount DVD I/O error in HPUX 11.31

SOLVED
Go to solution
mohd280
Advisor

Error when mount DVD I/O error in HPUX 11.31

Hi ,

 

 It is very simple but not working !!!!

 

 

======================================

 

# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
disk 0 0/0/0/1/0/0/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d0 /dev/dsk/c0t0d0s2 /dev/rdsk/c0t0d0 /dev/rdsk/c0t0d0s2
/dev/dsk/c0t0d0s1 /dev/dsk/c0t0d0s3 /dev/rdsk/c0t0d0s1 /dev/rdsk/c0t0d0s3
disk 1 0/0/0/1/0/0/0.0.1 sdisk CLAIMED DEVICE HP LOGICAL VOLUME
/dev/dsk/c0t0d1 /dev/rdsk/c0t0d1
disk 2 0/0/0/31/2.0.0 sdisk CLAIMED DEVICE hp DVD A DS8A8SH
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
#
# mount -F cdfs /dev/dsk/c1t0d0 /DVD
/dev/dsk/c1t0d0: I/O error
#

 

 

================================

 

Thank you in advance. 

5 REPLIES
Bill Hassell
Honored Contributor
Solution

Re: Error when mount DVD I/O error in HPUX 11.31

Put an HP-UX CD or DVD in and try again. HP-UX understands only a few CD/DVD formats.



Bill Hassell, sysadmin
Ajin_1
Valued Contributor

Re: Error when mount DVD I/O error in HPUX 11.31

Hi
May be its Drive Problem.Also please check the mount point also
Thanks & Regards
Ajin.S
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Torsten.
Acclaimed Contributor

Re: Error when mount DVD I/O error in HPUX 11.31

It may depend on the CD/DVD format.

Why not try to mount the ISO?

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=ISOIMAGE-ENH

 

 

Depending on your server hardware you may also try virtual media (mount the media over ILO).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Robert_Jewell
Honored Contributor

Re: Error when mount DVD I/O error in HPUX 11.31

Something else to be sure is that your mount point isnt being accessed.  I ran into a similar issue and found that the mount point I was trying to use was currently being exported.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
Highlighted
mohd280
Advisor

Re: Error when mount DVD I/O error in HPUX 11.31

Thank you all . The DC guy said DVD is there while apparently not .

It was DVD not inserted ! sorry for someone mistake :)