HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Error while installing HP-UX 11i V3 on VM of Integrity VM

 
SOLVED
Go to solution
senthil_kumar_1
Super Advisor

Error while installing HP-UX 11i V3 on VM of Integrity VM

Hi All,

I am getting below mentioned error while installing the HP-UX 11i v3 on VM of Integrity VM.


x ./etc/passwd, 332 bytes, 1 tape blocks
x ./etc/magic, 9014 bytes, 18 tape blocks
x ./etc/nfssec.conf, 1209 bytes, 3 tape blocks
x ./etc/hosts, 486 bytes, 1 tape blocks
x ./etc/services, 12275 bytes, 24 tape blocks
x ./etc/inetsvcs.conf, 15 bytes, 1 tape blocks
x ./etc/nsswitch.conf, 444 bytes, 1 tape blocks
x ./opt/swm/lib/libexpat.COPYING, 1346 bytes, 3 tape blocks
x ./opt/swm/lib/libexpat.so.5, 378484 bytes, 740 tape blocks
x ./opt/ignite/share/man/man1m.Z/print_manifest.1m, 1428 bytes, 3 tape blocks
x ./opt/ignite/binia/print_manifest, 146332 bytes, 286 tape blocks
x ./opt/ignite/bin symbolic link to /opt/ignite/binia
x ./opt/swm.iux/TUI/OEoverview.cmu, 5664 bytes, 12 tape blocks
x ./opt/swm.iux/TUI/OEoverview.init, 557 bytes, 2 tape blocks
x ./opt/swm.iux/TUI/TUIController, 48183 bytes, 95 tape blocks
x ./opt/swm.iux/TUI/addServer.sh, 1296 bytes, 3 tape blocks
x ./opt/swm.iux/TUI/chSWView.cmu, 3705 bytes, 8 tape blocks
x ./opt/swm.iux/TUI/changeOption.sh, 330 bytes, 1 tape blocks
x ./opt/swm.iux/TUI/formatTree.sh, 2122 bytes, 5 tape blocks
x ./opt/swm.iux/TUI/getHelp, 1711 bytes, 4 tape blocks
x ./opt/swm.iux/TUI/help.cmu, 3115 bytes, 7 tape blocks
x ./opt/swm.iux/TUI/jobMgmt.cmu, 2307 bytes, 5 tape blocks
x ./opt/swm.iux/TUI/launch.cmu, 1497 bytes, 3 tape blocks
x ./opt/swm.iux/TUI/logView.cmu, 2930 bytes, 6 tape blocks
x ./opt/swm.iux/TUI/logView.init, 181 bytes, 1 tape blocks
x ./opt/swm.iux/TUI/openSource.cmu, 10198 bytes, 20 tape blocks
x ./opt/swm.iux/TUI/openSource.init, 4790 bytes, 10 tape blocks
x ./opt/swm.iux/TUI/optionHelp.cmu, 2068 bytes, 5 tape blocks
x ./opt/swm.iux/TUI/pickOE.cmu, 10106 bytes, 20 tape blocks
x ./opt/swm.iux/TUI/pickOE.init, 874 bytes, 2 tape blocks
x ./opt/swm.iux/TUI/reboot.cmu, 1929 bytes, 4 tape blocks
x ./opt/swm.iux/TUI/resumeSavedJob.cmu, 924 bytes, 2 tape blocks
x ./opt/swm.iux/TUI/setOptions.cmu, 2196 bytes, 5 tape blocks
x ./opt/swm.iux/TUI/uimsg, 18681440 bytes, 36488 tape blocks
x ./opt/swm.iux/TUI/updatePrep, 2728 bytes, 6 tape blocks
x ./opt/swm.iux/TUI/viewSW.cmu, 5474 bytes, 11 tape blocks
x ./opt/swm.iux/TUI/viewSW.init, 1800 bytes, 4 tape blocks
x ./opt/swm.iux/bin/swm, 19700184 bytes, 38477 tape blocks
x ./opt/swm.iux/lbin/smdcmd, 23880 bytes, 47 tape blocks
x ./opt/swm.iux/help/C/OEoverview.txt, 2504 bytes, 5 tape blocks
x ./opt/swm.iux/help/C/chSWView.txt, 3835 bytes, 8 tape blocks
x ./opt/swm.iux/help/C/help.txt, 2120 bytes, 5 tape blocks
x ./opt/swm.iux/help/C/jobMgmt.txt, 2078 bytes, 5 tape blocks
x ./opt/swm.iux/help/C/launch.txt, 3442 bytes, 7 tape blocks
x ./opt/swm.iux/help/C/logView.txt, 3892 bytes, 8 tape blocks
x ./opt/swm.iux/help/C/openSource.txt, 3548 bytes, 7 tape blocks
x ./opt/swm.iux/help/C/optionHelp.txt, 1045 bytes, 3 tape blocks
x ./opt/swm.iux/help/C/pickOE.txt, 3688 bytes, 8 tape blocks
x ./opt/swm.iux/help/C/reboot.txt, 1537 bytes, 4 tape blocks
x ./opt/swm.iux/help/C/setOptions.txt, 1968 bytes, 4 tape blocks
x ./opt/swm.iux/help/C/viewSW-install.txt, 4319 bytes, 9 tape blocks
x ./opt/swm.iux/help/C/viewSW-oeupdate.txt, 4476 bytes, 9 tape blocks
x ./var/opt/ignite/local/manifest/template.def, 14441 bytes, 29 tape blocks
x ./var/adm/sw/security/_ACL, 40 bytes, 1 tape blocks
x ./var/adm/sw/security/_OWNER, 62 bytes, 1 tape blocks
x ./var/adm/sw/security/_PROD_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/_SOC_DFLT_ACL, 55 bytes, 1 tape blocks
x ./var/adm/sw/security/secrets, 15 bytes, 1 tape blocks
x ./var/adm/sw/defaults, 1383 bytes, 3 tape blocks
x ./dev/config, 0 bytes, 0 blocks, character device
x ./dev/null, 0 bytes, 0 blocks, character device
x ./dev/console, 0 bytes, 0 blocks, character device
x ./dev/kmem, 0 bytes, 0 blocks, character device
x ./dev/mem, 0 bytes, 0 blocks, character device
x ./dev/rroot, 0 bytes, 0 blocks, character device
x ./dev/root, 0 bytes, 0 blocks, character device
x ./dev/tty, 0 bytes, 0 blocks, character device
x ./dev/syscon, 0 bytes, 0 blocks, character device
x ./dev/systty, 0 bytes, 0 blocks, character device
x ./tmp/set_locale, 3305 bytes, 7 tape blocks
x ./configure3, 3556056 bytes, 6946 tape blocks
x ./monitor_bpr, 2470656 bytes, 4826 tape blocks
* Download_mini-system: Complete
* Loading_software: Begin
* Installing boot area on disk.
* Formatting HP Service Partition.
* Enabling swap areas.
* Backing up LVM configuration for "vg00".
* Relocating RAM filesystems.
* Running the ioinit command ("/sbin/ioinit -c")
* Creating device files via the insf command.
insf: Installing special files for sdisk instance 1 address 0/0/0/0.0.0
insf: Installing special files for sdisk instance 0 address 0/0/0/0.1.0
insf: Installing special files for esdisk instance 2 address 64000/0xfa00/0x0
insf: Installing special files for esdisk instance 3 address 64000/0xfa00/0x1
insf: Installing special files for pseudo driver dlpi
insf: Installing special files for pseudo driver kepd
insf: Installing special files for pseudo driver framebuf
insf: Installing special files for pseudo driver sad
* Constructing the bootconf file.
* Setting primary boot path to "/dev/rdisk/disk2".
Primary boot path set to 0/0/0/0.0x0.0x0 (/dev/rdisk/disk2)
* Starting install of the source (HP-UX Core Software).

======= 11/10/09 18:25:01 UTC BEGIN Software Install (user=root) (jobid=000001)

* Reading Target System's Installed Product Database (IPD)
* Target IPD: loopback
* Reading Source Depot(s)
* Source depot: /tmp/ign_configure/SD_CDROM
* Analyzing Software To Be Installed
* Checking if Reboot Needed
NOTE: A reboot will be required to complete the installation of the selected
software.
* Running checkinstall Scripts
* Running "checkinstall" for "SFM-JOEM-CORE,r=C.05.00.06".
NOTE: The "checkinstall" for "SFM-JOEM-CORE,r=C.05.00.06" gave an Exclude return
(exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/SFM-JOEM-CORE/pfiles/checkinstall".
* Running "checkinstall" for "SW-GETTOOLS,r=B.11.31.0903".
NOTE: The SW-GETTOOLS product is intended to be installed
only during execution of the update-ux command. Thus, the
SW-GETTOOLS product will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "SW-GETTOOLS,r=B.11.31.0903" gave an Exclude return
(exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/SW-GETTOOLS/pfiles/checkinstall".
* Running "checkinstall" for "Update-UX.SD-AGENT,r=B.11.31".
NOTE: The Update-UX.SD-AGENT fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.SD-AGENT fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.SD-AGENT,r=B.11.31" gave an Exclude return
(exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/SD-AGENT.4/checkinstall".
* Running "checkinstall" for "Update-UX.SD-CMDS,r=B.11.31".
NOTE: The Update-UX.SD-CMDS fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.SD-CMDS fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.SD-CMDS,r=B.11.31" gave an Exclude return
(exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/SD-CMDS.4/checkinstall".
* Running "checkinstall" for "Update-UX.SD-FRE-I-MSG,r=B.11.31.0903.332".
NOTE: The Update-UX.SD-FRE-I-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B
.11.31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.SD-FRE-I-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B.11.
31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.SD-FRE-I-MSG,r=B.11.31.0903.332" gave an
Exclude return (exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/SD-FRE-I-MSG/checkinstall".
* Running "checkinstall" for "Update-UX.SD-GER-I-MSG,r=B.11.31.0903.332".
NOTE: The Update-UX.SD-GER-I-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B
.11.31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.SD-GER-I-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B.11.
31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.SD-GER-I-MSG,r=B.11.31.0903.332" gave an
Exclude return (exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/SD-GER-I-MSG/checkinstall".
* Running "checkinstall" for "Update-UX.SD-JPN-E-MSG,r=B.11.31.0903.332".
NOTE: The Update-UX.SD-JPN-E-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B
.11.31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.SD-JPN-E-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B.11.
31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.SD-JPN-E-MSG,r=B.11.31.0903.332" gave an
Exclude return (exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/SD-JPN-E-MSG/checkinstall".
* Running "checkinstall" for "Update-UX.SD-JPN-S-MSG,r=B.11.31.0903.332".
NOTE: The Update-UX.SD-JPN-S-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B
.11.31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.SD-JPN-S-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B.11.
31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.SD-JPN-S-MSG,r=B.11.31.0903.332" gave an
Exclude return (exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/SD-JPN-S-MSG/checkinstall".
* Running "checkinstall" for "Update-UX.SD-KOR-E-MSG,r=B.11.31.0903.332".
NOTE: The Update-UX.SD-KOR-E-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B
.11.31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.SD-KOR-E-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B.11.
31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.SD-KOR-E-MSG,r=B.11.31.0903.332" gave an
Exclude return (exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/SD-KOR-E-MSG/checkinstall".
* Running "checkinstall" for "Update-UX.SD-TCH-B-MSG,r=B.11.31.0903.332".
NOTE: The Update-UX.SD-TCH-B-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B
.11.31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.SD-TCH-B-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B.11.
31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.SD-TCH-B-MSG,r=B.11.31.0903.332" gave an
Exclude return (exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/SD-TCH-B-MSG/checkinstall".
* Running "checkinstall" for "Update-UX.SD-TCH-H-MSG,r=B.11.31.0903.332".
NOTE: The Update-UX.SD-TCH-H-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B
.11.31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.SD-TCH-H-MSG,r=B.11.31.0903.332,a=HP-UX_B.11.31_IA/PA,v=HP,fr=B.11.
31.0903.332,fa=HP-UX_B.11.31_IA/PA fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.SD-TCH-H-MSG,r=B.11.31.0903.332" gave an
Exclude return (exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/SD-TCH-H-MSG/checkinstall".
* Running "checkinstall" for "Update-UX.UUX2-OS-LIBS,r=B.11.31".
NOTE: The Update-UX.UUX2-OS-LIBS fileset is intended to be installed
only during execution of the update-ux command. Thus, the
Update-UX.UUX2-OS-LIBS fileset will exclude itself from
installation at this time.
NOTE: The "checkinstall" for "Update-UX.UUX2-OS-LIBS,r=B.11.31" gave an Exclude
return (exit code "3"). The script location was
"/tmp/ign_configure/SD_CDROM/catalog/Update-UX/UUX2-OS-LIBS.4/checkinstall".
NOTE: A reboot will be required to complete the installation of the selected
software.
* Checking Disk Space Needed
ERROR: Exiting due to keyboard interrupt.
ERROR: No software was installed (no installed product database was created).
ERROR: Software load had one or more errors.

======= 11/10/09 18:38:14 UTC The operating system software has not been
successfully loaded. The swm install(1M) application was not completed or
failed to load some key files. (exit status was = 1).

1: Change the install server and/or depot information.
2: Retry software load process (non-interactive mode).
3: Retry software load process (interactive mode).
4: Run a shell.

Choose a recovery action from above:





How to solve this?

Why it is happening?
9 REPLIES
Suraj K Sankari
Honored Contributor

Re: Error while installing HP-UX 11i V3 on VM of Integrity VM

Hi,

Try with 3 option. (interactive mode)

Suraj
senthil_kumar_1
Super Advisor

Re: Error while installing HP-UX 11i V3 on VM of Integrity VM

I have selected option 2.

Now it is installing.


Why i am getting above mentioned errors.
Tim Nelson
Honored Contributor

Re: Error while installing HP-UX 11i V3 on VM of Integrity VM

ERROR: Exiting due to keyboard interrupt.


Somebody hit ????
Pete Randall
Outstanding Contributor

Re: Error while installing HP-UX 11i V3 on VM of Integrity VM

I would say Tim has to be right and someone "accidentally" interrupted the install process.


Pete

Pete
senthil_kumar_1
Super Advisor

Re: Error while installing HP-UX 11i V3 on VM of Integrity VM

Hi All,

1) I am asking about all NOTE:, what is this NOTE?


2)In middle of installation, it is showing follwing message:

=================================================
* Please insert media number "2".
1) Continue.
Please pick from the choices above. (default: 1):


Is it asking us to insert the second DVD?



3)How many DVDs are coming with HP-UX 11i v3?


4)For inserting new DVD into VM, first we have to ej(ect) and then in(sert) it again?


Tim Nelson
Honored Contributor
Solution

Re: Error while installing HP-UX 11i V3 on VM of Integrity VM

1) I am asking about all NOTE:, what is this NOTE? <>


2)In middle of installation, it is showing follwing message:

=================================================
* Please insert media number "2".
1) Continue.
Please pick from the choices above. (default: 1):


Is it asking us to insert the second DVD?
<< yep 11.31 comes on 2 DVDs >>


3)How many DVDs are coming with HP-UX 11i v3?
<< yep 11.31 comes on 2 DVDs >>

4)For inserting new DVD into VM, first we have to ej(ect) and then in(sert) it again?
ctrl-b , vm, ej, change dvd, in, ctrl-b, ma co, enter


Re: Error while installing HP-UX 11i V3 on VM of Integrity VM

>1) I am asking about all NOTE:, what is this NOTE?

Most seem to say filesets are excluded as not being valid for your architecture or only for update-ux later.
And most importantly, a reboot is required.
senthil_kumar_1
Super Advisor

Re: Error while installing HP-UX 11i V3 on VM of Integrity VM

Hi Dennis Handly,

You are telling that after software installation the system needs to be restarted, am i correct?

Re: Error while installing HP-UX 11i V3 on VM of Integrity VM

>You are telling that after software installation the system needs to be restarted, am i correct?

Yes, except an error message said everything was interrupted.