Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Execute the command to reset all the cache bits.

James Crandall
Occasional Visitor

Execute the command to reset all the cache bits.

I'm getting the following EMS notification and I just need to know how to "reset all the cache bits".

Thanks in advance -- James C.

>------------ Event Monitoring Service Event Notification ------------<

Notification Time: Thu May 17 07:32:10 2007

datatel1.shastacollege.edu sent Event Monitor notification information:

/storage/events/disk_arrays/FC60/001E00A0B807A2B2
is >= 3.
Its current value is CRITICAL(5).



Event data from monitor:

Event Time..........: Thu May 17 07:32:10 2007
Severity............: CRITICAL
Monitor.............: fc60mon
Event #.............: 30
System..............: datatel1.shastacollege.edu

Summary:
Disk Array at hardware path :
Array at hardware path 1/0/2/0/0.8.0.5.0.0.0, path 1/0/4/0/0.8.0.4.0.0.0: The
logical unit 31 has
the Cache Mirror Enable bit disabled.



Description of Error:


This event message is displayed when the Cache Mirror Enable
bit has been disabled.


Probable Cause / Recommended Action:


Execute the command to reset all the cache bits.

Additional Event Data&colon;
System IP Address...: 10.3.3.50
Event Id............: 0x464c676a00000001
Monitor Version.....: B.01.01
Event Class.........: I/O
Client Configuration File...........:
/var/stm/config/tools/monitor/default_fc60mon.clcfg
Client Configuration File Version...: A.01.01
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data&colon;
System Model Number.............: 9000/800/rp7410
EMS Version.....................: A.03.20
STM Version.....................: A.31.00
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/fc60mon.htm#30

v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v



Product/Device Data&colon;

Logger ID.........: (not available/applicable)
Product Identifier: (not available/applicable)
Product Qualifier.: (not available/applicable)
SCSI Target ID....: (not available/applicable)
SCSI LUN..........: (not available/applicable)


>---------- End Event Monitoring Service Event Notification ----------<

 

 

P.S. This thread has been moevd from disk to HP-UX > sysadmin. - Hp forum Moderator