cancel
Showing results for 
Search instead for 
Did you mean: 

FC HBA Speed settings

pa8700
Regular Advisor

FC HBA Speed settings

Is there any way to configre the FC HBA speed. Any conf file.. to permenantly set the speed .I knows the fcmsutil force_speed command to dynamicaly set the speed .

4 REPLIES
Sagar Sirdesai
Trusted Contributor

Re: FC HBA Speed settings

Hi

Ideally the speed of the FC on the host side is AUTO and the SAn Admin can set the speed on the switch side for that particular port

Sagar
R.K. #
Honored Contributor

Re: FC HBA Speed settings

Hi..

Still if you want to make some changes.

Find which fc in installed:
# ioscan -fnC fc

Find their respective config file:
# cd /etc/rc.config.d/
# ll hp*conf

Edit the related file.

Regds..
Don't fix that what ain't broke
Torsten.
Acclaimed Contributor

Re: FC HBA Speed settings

As said in your previous thread - this should work with autoneg.

Make sure the HBA and the switch has current firmware/driver!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Johnson Punniyalingam
Honored Contributor

Re: FC HBA Speed settings

I hope its your duplicate Thread

http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1404108
Problems are common to all, but attitude makes the difference