HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Fiber card error: Received BA_RJT as response to ABTS

 
SOLVED
Go to solution
Sunny Jaisinghani
Trusted Contributor

Fiber card error: Received BA_RJT as response to ABTS

Hello Gurus,

I get these alerts for 2 fc interfaces everyday. I tried finding what it means but couldn't find any good references.

I am also attaching some info about the interfaces.

Event data from monitor:

Event Time..........: Sun Nov 8 03:29:55 2009
Severity............: SERIOUS
Monitor.............: dm_TL_adapter
Event #.............: 70
System..............: eca1db6.kineticsys.com

Summary:
Adapter at hardware path 1/0/4/1/0 : Received BA_RJT as response to ABTS


Description of Error:


lbolt value: 607089456

Received BA_RJT as response to ABTS from device at
port 0x11d00
BA_RJT reason code is 0x3
Full BA_RJT payload is 0x30300


Probable Cause / Recommended Action:

The attempt to abort an I/O was rejected. This might indicate
a non-PLDA compliant device.
Examine the reject reason code and fibre channel device
logs for errors. If the problem persists, contact your
HP customer representative.


Please share info if anyone has come across such alerts

Thanks
Sunny
11 REPLIES
Johnson Punniyalingam
Honored Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

Hope you d'not mind "please do not post ur << eca1db6.kineticsys.com="">
I suspect to check you SAN - cable from switch

or check with your storage Support Admin

# ioscan -fnH 1/0/4/1/0

does it show's claimed

# fcmsutil /dev/td0

Problems are common to all, but attitude makes the difference
Sunny Jaisinghani
Trusted Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

I usually remove the system name. Missed it this time.

Anyways....

Class I H/W Path Driver S/W State H/W Type Description
==================================================================
fc 0 1/0/4/1/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td0
fc 1 1/0/6/1/0 td CLAIMED INTERFACE HP Tachyon TL/TS Fibre Channel Mass Storage Adapter
/dev/td1


# fcmsutil /dev/td0

Vendor ID is = 0x00103c
Device ID is = 0x001028
TL Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x000006
Topology = PTTOPT_FABRIC
Local N_Port_id is = 0x011f00
N_Port Node World Wide Name = 0x50060b00000aab85
N_Port Port World Wide Name = 0x50060b00000aab84
Driver state = ONLINE
Hardware Path is = 1/0/4/1/0
Number of Assisted IOs = -202000466
Number of Active Login Sessions = 1
Dino Present on Card = NO
Maximum Frame Size = 896
Driver Version = @(#) libtd.a HP Fibre Channel Tachyon TL/TS/XL2 Driver B.11.11.12 PATCH_11.11 (PHSS_31326) /ux/kern/kisu/TL/src/common/wsio/td_glue.c: Sep 5 2005, 10:14:40

# fcmsutil /dev/td1

Vendor ID is = 0x00103c
Device ID is = 0x001028
TL Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x000006
Topology = PTTOPT_FABRIC
Local N_Port_id is = 0x011100
N_Port Node World Wide Name = 0x50060b000007e391
N_Port Port World Wide Name = 0x50060b000007e390
Driver state = ONLINE
Hardware Path is = 1/0/6/1/0
Number of Assisted IOs = -1073311630
Number of Active Login Sessions = 1
Dino Present on Card = NO
Maximum Frame Size = 896
Driver Version = @(#) libtd.a HP Fibre Channel Tachyon TL/TS/XL2 Driver B.11.11.12 PATCH_11.11 (PHSS_31326) /ux/kern/kisu/TL/src/common/wsio/td_glue.c: Sep 5 2005, 10:14:40


Johnson Punniyalingam
Honored Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

ioscan -fnH 1/0/4/1/0

above command will show all the luns attached, we can doudble confirm all disk are shown claimed with associated withe HW path "1/0/4/1/0"

No ioscan -fnC fc
Problems are common to all, but attitude makes the difference
Johnson Punniyalingam
Honored Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

we need check "some tests on the card"

man fcmsutil for details.

also check "/var/adm/syslog/syslog.log

Problems are common to all, but attitude makes the difference
Sunny Jaisinghani
Trusted Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

Everything is CLAIMED
Johnson Punniyalingam
Honored Contributor
Solution

Re: Fiber card error: Received BA_RJT as response to ABTS

>>I suspect to check you SAN - cable from switch

or check with your storage Support Admin <<

Any inputs for above Question?

As mentioned above you need perform some tests on the Fc card,

man fcmsutil

and see the attachment file
Problems are common to all, but attitude makes the difference
Sunny Jaisinghani
Trusted Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

couldn't find anything relevant in syslog.log.

Can you suggest some tests that we can perform on the fc interface
Johnson Punniyalingam
Honored Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

>>Probable Cause / Recommended Action:

If the problem persists, contact your
HP customer representative <<<

if all above suggestions "didn't help

meaning through check on fc card
proper check from fc cable switch /storage side

log HW call to HP
Problems are common to all, but attitude makes the difference
Sunny Jaisinghani
Trusted Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

I wont get an answer from the storage admin so soon. It will take time. I work remotely so cant check the cabling myself.

>>>>># /opt/fcms/bin/fcmsutil /dev/td11 lb plm

WARNING: This is a DESTRUCTIVE test.
This might result in failure of current I/O requests.

Can this test harm anything??? I am not sure...
Johnson Punniyalingam
Honored Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

>>Can you suggest some tests that we can perform on the fc interface<<

>>Can this test harm anything??? I am not sure<<

I 'am worried for any further suggestion because. if you feel no safe may be you should run the test when you feel safe
Problems are common to all, but attitude makes the difference
Sunny Jaisinghani
Trusted Contributor

Re: Fiber card error: Received BA_RJT as response to ABTS

# /opt/fcms/bin/fcmsutil /dev/td0 lb plm

WARNING: This is a DESTRUCTIVE test.
This might result in failure of current I/O requests.
Do you want to continue? (y/n) [n]...y
Data came back intact
# /opt/fcms/bin/fcmsutil /dev/td1 lb plm

WARNING: This is a DESTRUCTIVE test.
This might result in failure of current I/O requests.
Do you want to continue? (y/n) [n]...y
Data came back intact


I'll get the cabling checked.

Thanks Johnson