Operating System - HP-UX
1745798 Members
3654 Online
108722 Solutions
New Discussion юеВ

Fibre Card driver [not]installed on rx2660

 
SOLVED
Go to solution
antonio elder prado
Regular Advisor

Fibre Card driver [not]installed on rx2660

Hi,

i have installed (physically) a dual fibrecard emulex (LPE11002-E) on rx2660 with hpux 11.31.
when i:
ioscan -fn | grep -i fc
#
no card fibre card under ioscan
==
under ioscan shows:
unknown -1 0/2/0/0/0/0 UNCLAIMED UNKNOWN PCIe SerialBus (10dffe00)
unknown -1 0/2/0/0/0/1 UNCLAIMED UNKNOWN PCIe SerialBus (10dffe00)

and under /dev
i do see no fc*
# ls -lt /dev/fc*
/dev/fc* not found
#

===

this mostly tells me that i do not have the driver for that fibrecard installed.
however:
swlist -l bundle | grep -i fib
FibrChanl-00 B.11.31.0909 FibreChannel;HW=A6795A,A5158A
FibrChanl-01 B.11.31.0909 FibrChnl;HW=A6826A,A9782A,A9784A,AB378A/B,AB379A/B,AB465A,AD193A,AD194A,AD300A
FibrChanl-02 B.11.31.0909 FCLP;HW=AD299A,AD355A,AD221A,AD222A,AD393A,AH402A,AH403A,403621-B21,456972-B21
#


it shows that i have these bundle fibrChan00,01,02 installed.
on reading the doc, it says that the driver for the emulex fibre card should be under one of these Fibr bundles.

do you know what i am doing wrong?

what am i missing?

as always, thank you for your time and help,
./antonio/.


5 REPLIES 5
Suraj K Sankari
Honored Contributor
Solution

Re: Fibre Card driver [not]installed on rx2660

Hi,

can you post your full output or "ioscan -f"
have you try to do "insf -e" after install the card.

Suraj
antonio elder prado
Regular Advisor

Re: Fibre Card driver [not]installed on rx2660

Hi Suraj,

this is the ioscan -f, and i did try the insf -e

==

# ioscan -f
Class I H/W Path Driver S/W State H/W Type Description
=================================================================================
root 0 root CLAIMED BUS_NEXUS
ioa 0 0 sba CLAIMED BUS_NEXUS System Bus Adapter (4030)
ba 0 0/0 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
tty 0 0/0/1/0 rmp3f01 CLAIMED INTERFACE PCI class(255,0) (103c1303)
tty 1 0/0/1/1 rmp3f01 CLAIMED INTERFACE PCI SimpleComm (103c1302)
tty 2 0/0/1/2 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
usb 0 0/0/2/0 hcd CLAIMED INTERFACE NEC OHCI Controller
usbcomp 0 0/0/2/0.1 usbcomposite CLAIMED DEVICE USB Composite Device
usbhid 0 0/0/2/0.1.0 hid CLAIMED DEVICE USB HID Kbd(0)
usbhid 1 0/0/2/0.1.1 hid CLAIMED DEVICE USB HID Pointer(1)
usbhid 2 0/0/2/0.2 hid CLAIMED DEVICE USB HID Kbd(2)
usbhid 3 0/0/2/0.3 hid CLAIMED DEVICE USB HID Mouse(3)
usb 1 0/0/2/1 hcd CLAIMED INTERFACE NEC OHCI Controller
usb 2 0/0/2/2 ehci CLAIMED INTERFACE NEC EHCI Controller
usbms 0 0/0/2/2.2 ms CLAIMED DEVICE USB Mass Storage [0]
graphics 0 0/0/3/0 gvid_core CLAIMED INTERFACE PCI Display (1002515e)
ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
escsi_ctlr 1 0/1/1/0 sasd CLAIMED INTERFACE HP PCI/PCI-X SAS MPT Adapter
ext_bus 0 0/1/1/0.0.0 sasd_vbus CLAIMED INTERFACE SAS Device Interface
target 3 0/1/1/0.0.0.0 tgt CLAIMED DEVICE
disk 4 0/1/1/0.0.0.0.0 sdisk CLAIMED DEVICE HP DG0146FAMWL
target 7 0/1/1/0.0.0.1 tgt CLAIMED DEVICE
disk 3 0/1/1/0.0.0.1.0 sdisk CLAIMED DEVICE HP DG0146FAMWL
target 1 0/1/1/0.0.0.2 tgt CLAIMED DEVICE
disk 6 0/1/1/0.0.0.2.0 sdisk CLAIMED DEVICE HP DG0146FAMWL
target 5 0/1/1/0.0.0.3 tgt CLAIMED DEVICE
disk 2 0/1/1/0.0.0.3.0 sdisk CLAIMED DEVICE HP DG0146FAMWL
target 0 0/1/1/0.0.0.4 tgt CLAIMED DEVICE
disk 0 0/1/1/0.0.0.4.0 sdisk CLAIMED DEVICE HP DG0146FAMWL
target 6 0/1/1/0.0.0.5 tgt CLAIMED DEVICE
disk 1 0/1/1/0.0.0.5.0 sdisk CLAIMED DEVICE HP DG0146FAMWL
target 2 0/1/1/0.0.0.6 tgt CLAIMED DEVICE
disk 7 0/1/1/0.0.0.6.0 sdisk CLAIMED DEVICE HP DG0146FAMWL
target 4 0/1/1/0.0.0.7 tgt CLAIMED DEVICE
disk 5 0/1/1/0.0.0.7.0 sdisk CLAIMED DEVICE HP DG0146FAMWL
lan 0 0/1/2/0 igelan CLAIMED INTERFACE HP PCI-X 1000Base-T Dual-port Built-in
lan 1 0/1/2/1 igelan CLAIMED INTERFACE HP PCI-X 1000Base-T Dual-port Built-in
ba 2 0/2 gh2p CLAIMED BUS_NEXUS Local Bus Adapter
ba 3 0/2/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
slot 0 0/2/0/0/0 pci_slot CLAIMED SLOT PCI Slot
unknown -1 0/2/0/0/0/0 UNCLAIMED UNKNOWN PCIe SerialBus (10dffe00)
unknown -1 0/2/0/0/0/1 UNCLAIMED UNKNOWN PCIe SerialBus (10dffe00)
ba 4 0/3 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
slot 1 0/3/1 pci_slot CLAIMED SLOT PCI Slot
ba 5 0/4 gh2p CLAIMED BUS_NEXUS Local Bus Adapter
ba 6 0/4/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
slot 2 0/4/0/0/0 pci_slot CLAIMED SLOT PCI Slot
processor 0 120 processor CLAIMED PROCESSOR Processor
processor 1 121 processor CLAIMED PROCESSOR Processor
processor 2 122 processor CLAIMED PROCESSOR Processor
processor 3 123 processor CLAIMED PROCESSOR Processor
ba 7 250 pdh CLAIMED BUS_NEXUS Core I/O Adapter
ipmi 0 250/0 ipmi CLAIMED INTERFACE IPMI Controller
tty 3 250/1 asio0 CLAIMED INTERFACE Built-in RS232C
acpi_node 0 250/2 acpi_node CLAIMED INTERFACE Acpi Hardware
usbmsvbus 1 255/1 mass_storage CLAIMED VIRTBUS USB Mass Storage
ext_bus 1 255/1/0 usb_ms_scsi CLAIMED INTERFACE USB Mass Storage SCSI
target 8 255/1/0.0 tgt CLAIMED DEVICE
disk 16 255/1/0.0.0 sdisk CLAIMED DEVICE TEAC DVD-ROM DW-224EV



thank you,
./antonio/.
antonio elder prado
Regular Advisor

Re: Fibre Card driver [not]installed on rx2660

hi Suraj,
if you do not mind to continue to help me on this (or anybody else) i greatly appreciate, i just realized that by assigning 10 points it says that the problem was solved.
sorry about the confusion,
thank you,
./antonio/.
Horia Chirculescu
Honored Contributor

Re: Fibre Card driver [not]installed on rx2660

Hello,

According to:

http://www.emulex.com/downloads/dell/lpe11002-e.html

This card is not supported on HP-UX.

Best regards,
Horia.

Best regards from Romania,
Horia.
antonio elder prado
Regular Advisor

Re: Fibre Card driver [not]installed on rx2660

hi Horia,

i did look all around and i believe you are correct. this card lpe11002-e it is not support on hpux11.31. or hpux in general.

thank you very much for your time and knowledge.

peace,
./antonio/.