cancel
Showing results for 
Search instead for 
Did you mean: 

GICAP configuration

manish_mpc
Advisor

GICAP configuration

Hi All, We have configured GICAP in our setup accross two SD, now we have deactived some cores from "A" SD and utlized in "B" SD by GICAP rights.

Now my question is how do i check these deactivated or Borrowed core on "A" SD and activated cores on "B" SD

Kindly let me know if any other information require to clear my queries
7 REPLIES
Torsten.
Acclaimed Contributor

Re: GICAP configuration

I think "icapstatus" is what you are looking for.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
manish_mpc
Advisor

Re: GICAP configuration

in icapstatus o/p i cant sumarize exactly how much cores are deactivated, same time if i checked vparstatus -A o/p, it shows me the same no of cores are free for that nPar
Torsten.
Acclaimed Contributor

Re: GICAP configuration

Can you post the output, please?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
manish_mpc
Advisor

Re: GICAP configuration

Hi, Plz find below both o/p from icapstatus & vparstatus -A commands

=============================================
vpar9/->icapstatus
Software version: B.11.23.09.01.00.28
System ID: vpar3
Serial number: SGH4708218
Product number: A9834A
Unique ID: 43085361-d598-11db-9596-af25596f7ece
System contact e-mail: Not set
From e-mail: Set to the default ('adm')
Asset reporting: on
Temporary capacity warning period: 15 days
Exception status: No exception

Member oldprod in GiCAP group iasd
----------------------------------
Active Group Manager: GM
Standby Group Manager: N/A
Loaned core usage rights: 9
Borrowed cell usage rights: 0
Borrowed memory usage rights: 0.0 GB

Local Virtual Partition Status
------------------------------
Total number of assigned cores: 3
Number of active assigned cores: 3
Number of inactive assigned cores: 0
Additional cores that can be assigned with current usage rights: 0
Number of cores that could be assigned with additional usage rights: 9
Number of cores that can be assigned with temporary capacity: 9
Number of cores currently unavailable for assignment: 0

Local nPartition Status (08/26/10 12:48:15)
-------------------------------------------
Total number of configured cores: 32
Number of Intended Active cores: 23
Number of active cores: 23
Number of inactive cores: 9

Instant Capacity Resource Summary
---------------------------------
Number of cells without usage rights: 0
Number of inactive cells: 0
Amount of memory without usage rights: 0.0 GB
Amount of inactive memory: 0.0 GB
Number of cores without usage rights: 9
Number of inactive cores: 17
Number of cores using temporary capacity: 0
Temporary capacity available: 0 days, 16 hours, 0 minutes
Projected temporary capacity expiration: N/A

Allocation of Instant Capacity Resources among the nPartitions
--------------------------------------------------------------
Intended Actual
nPar Total Active Active =======Inactive======= Runs
ID Cores Cores Cores Cores Memory Cells iCAP nPar Name
==== ===== ======== ====== ====================== ==== ======================
0 32 32 30 2 0.0 GB 0 Yes TCS-SD1-npar1
1 32 32 30 2 0.0 GB 0 Yes TCS-SD1-npar2
2 32 32 28 4 0.0 GB 0 Yes TCS-SD1-npar3
3 32 23 23 9 0.0 GB 0 Yes Partition 3 (local)
N/A 0 N/A N/A N/A 0.0 GB 0 N/A Unassigned Cells


=================================================================================

vpar9/->vparstatus -A
vparstatus: Warning: Command version is different from monitor version. Some fields may not be displayed.
[CPUs (path)]: 14.127
15.120
15.121
15.122
15.123
15.124
15.125
15.126
15.127
[CLP (CellID Count)]: 12 0
13 0
14 1
15 8
[Available CPUs]: 9

[Available I/O devices (path)]: 14.0.13
15.0.0
15.0.1
15.0.2
15.0.9
15.0.10
15.0.12
15.0.13
15.0.14

[Available ILM (Base /Range)]: 0x1ea8000000/5248
(bytes) (MB) 0x4040000000/2944
[Available ILM (MB)]: 8192

[Available CLM (CellID Base /Range)]:
(bytes) (MB)
[Available CLM (CellID MB)]: 12 0
13 0
14 0
15 0
Torsten.
Acclaimed Contributor

Re: GICAP configuration

I don't know about your configuration details and expectations, but does it contain the needed information or not?

...
Number of cores that could be assigned with additional usage rights: 9
Number of cores that can be assigned with temporary capacity: 9
...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
manish_mpc
Advisor

Re: GICAP configuration

Hi,

What i understand we have Loaned 9 cores from "A" SD and 9 Borrowed core on "B" SD.

In this i want to check how i can find out how many cores are deactivated & activated from partcular nPars of both
SD
Torsten.
Acclaimed Contributor

Re: GICAP configuration

On the group manager run

icapmanage -s -v

to get more details.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!