GS80 fault!!!

[wangmx]

hi,all,
Today,our company's GS80 is wrong,and reboot auto,but not work,the display is phase1-setp 6.
what wrong with the GS80?how to solve?
thanks a lot.

[Aco Blazeski]

First of all you should see where is the problem:
With GS80 you should have PC station connected to serial port on GS80 and terminal software which allows you to go to SCM prompt.
There you'll monitoring POST and see which component cause the problem.

[Aaron Biver_2]

No diagnosis can be made with the information you have provided. Can you show us some of the console messages that appear when the failure occurs?

It sounds like you may have a hardware problem. Given that a day has passed already, I'm guessing you would have called for service already.