HBA's login in and out of the fabric

[tarcisio cruz]

What is the latest firmware for HBA card A5158A

Currently running the following firmware and drivers but I'm seeing two of the hba's login in and out of the fabric. errrs on fabric are link timout, and then a fabric login and then a plogi.
see below for error
Driver: A5158A B.11.00.10 PCI Tachyon TL/TS Fibre
Channel
Patch: PHSS_26798 1.0 Tachyon TL Fibre
Channel Driver Patch

Firmware versions:

Card 0:
TL Chip Revision No is = 2.3

Card 1:
TL Chip Revision No is = 2.3

Card 2:
TL Chip Revision No is = 2.3

Card 3:
TL Chip Revision No is = 2.3


t9: Link Timeout
Feb 19 17:12:16.199 port 9: FLOGI 0x051900 cos=0x8 bb_credit=4 df_size=960 cf=0x0
Feb 19 17:12:16.216 port 9: PLOGI s_id=0x51900 d_id=0xfffffc cos=0x8 df_size=960
0x10239cf0 (tThad): Feb 19 17:12:16

[Eugeny Brychkov]

I see link timeout message. Please check:
- FC cable;
- GBIC (try exchange 2 GBICs within 2 brocade ports, or use spare one);
- check brocade's firmware;
- if you use 3x00 brocade (2GB/s) try lockinng its port at 1GB/s speed;
- check for latest Diags, GR and HWE patch bundles (should be from the same CD release);
- disable fcms monitoring in monconfig (not sure it it's good idea, but you may try)
Eugeny