System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Auto Port Aggregation Priority setting

Chuk Akonnor
Occasional Contributor

HP Auto Port Aggregation Priority setting

Guru
I have installed and configured HP APA on hpux 11.23. Below is what the /etc/lanmon/lanconfig.ascii file looks like:
FAILOVER_GROUP lan900
STATIONARY_IP 10.96.14.2
STANDBY lan0 3
PRIMARY lan2 5

FAILOVER_GROUP lan901
STATIONARY_IP 10.96.15.2
STANDBY lan1 3
PRIMARY lan3 5

The Priority of the primary and standby LANs are set to 5 snd 3. Any one knows how to change these so they are all set to 3 and 3.

I have tried adding the following:
HP_APAPORT_PRIORITY[3]=3
to hp_apaportconf but it still did not change it. Please help!!!!!!!!!!!!!!!!!!!!!

Thanks guys
1 REPLY
Steven E. Protter
Exalted Contributor

Re: HP Auto Port Aggregation Priority setting

Shalom,

What are you trying to do? What is the goal.

I don't recommend making changes here unless one of the NIC cards is faster than the other.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com