cancel
Showing results for 
Search instead for 
Did you mean: 

HP Blades with 11.30

f. halili
Trusted Contributor

HP Blades with 11.30

Hello everyone,

We'll be building new servers using HP blades soon and with 11.30.

I have not worked with blades so this is new to me. Any good procedure/documentation in implementing HP blades with 11.30 will be appreciated. Also, for multiple blades in an enclosure how can these be managed effectively from install to recovery.

Thanks,
f. halili
derekh
1 REPLY
rick jones
Honored Contributor

Re: HP Blades with 11.30

I assum eyou mean HP-UX 11.31 aka 11iv3? As for blades, all the OS stuff is just the same for a blade as it is for a rack-mount server. You might start at:

http://www.hp.com/go/bl870c or

http://www.hp.com/go/bl860c and follow links from there to stuff about blade-specific things - chassis/io module admin etc.
there is no rest for the wicked yet the virtuous have no pillows