cancel
Showing results for 
Search instead for 
Did you mean: 

HP DLT VS80 Problem

Tetard
Occasional Contributor

HP DLT VS80 Problem

Hi there,
Impossible to update firmware with LT&T.
It discover our tape drive but it noticed that LT&T does not support this device.
Problem was that I can not change block size for compression in Backup exec.
So idea was to update firmaware because I have already update Backup Exec, SCSI driver, HP driver ...
Any idea ?
Regards,
2 REPLIES
Ivan Ferreira
Honored Contributor

Re: HP DLT VS80 Problem

I have seen in this forum that another person used the LT&T to update the firmware, maybe an older version?

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1012046

You could try the software provided by Quantum:

http://www.quantum.com/ServiceandSupport/SoftwareandDocumentationDownloads/DLTVS80/Index.aspx#Firmware
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Ivan Ferreira
Honored Contributor

Re: HP DLT VS80 Problem

See also this link:



"HP DLT - How to create and use a code update tape for DLT1 / DLT VS80 / DLT VS160 "

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=es&cc=es&taskId=125&prodSeriesId=63898&prodTypeId=12169&objectID=lpg50038

Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?