System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Integrity Itanium Redhat Linux 5.3 and EVA 5000

 
pandora_1
Frequent Advisor

HP Integrity Itanium Redhat Linux 5.3 and EVA 5000

Hi all,

I have a new hardware HP integrity server itanium processor installed with REDHAT Itanium lInux 5.3,which has Qlogic HBA card. We have an EVA 5000 SAN Storage running since years. I am trying to present the disk to this Itanium Server, but its not getting viewed/scanned. Fibre Link is OK. Does the EVA 5000 support Redhat Itanium linux? May anyone suggest on this ?

Thanks
Azad
1 REPLY
Ivan Ferreira
Honored Contributor

Re: HP Integrity Itanium Redhat Linux 5.3 and EVA 5000

Have your configured correctly your host and host type on the storage? Where you able to select the server's hba from the dropdown list?

There are some things you need to check, sometimes, the LUNs are not detected unless you reboot the server.

Check also the attached file and try to find a new version of the same document if available.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?