HP LOGICAL VOLUME

[Carme Torca]

Hi,

I have one itanium with two disks connected, but when I do an
#ioscan -fnuCdisk, it shows me

disk 1 0/2/1/0/4/0.0.0 sdisk CLAIMED DEVICE HP LOGICAL VOLUME

/dev/dsk/c4t0d0 /dev/rdsk/c4t0d0
/dev/dsk/c4t0d0s1 /dev/rdsk/c4t0d0s1
/dev/dsk/c4t0d0s2 /dev/rdsk/c4t0d0s2
/dev/dsk/c4t0d0s3 /dev/rdsk/c4t0d0s3

What is it?
Thanks!
Carmen.

[RAC_1]

This is itanium. New arctitecture.
Ream man pages of idisk, efi

[Carme Torca]

And how can I make a mirror with this?, if its only one LOGICAL VOLUME with 2 disk?

Thanks!

[Enrico P.]

Hi,
if this is the entire output the system has got only one disk.

Enrico

[Carme Torca]

Hi,

No the system has two disk, but it doesn't shows:
CLAIMED DEVICE HP 36.4GST336753LC

it shows:
CLAIMED DEVICE HP LOGICAL VOLUME

[Enrico P. · Accepted solution]

In attach the LVM mirror procedure for Itanium.

Enrico

[Enrico P.]

I don' t understand ...

You have two disks and one LV that "split" in this two disk?

Enrico

[Carme Torca]

I'm sorry
At the machine are two disk, but when I do an ioscan this shows me HP LOGICAL VOLUME, and there are two solutions (I think):

1) One of the disk are bad connect
2) HP LOGICAL VOLUME means the 2 disks together ¿?

But, if HP LOGICAL VOLUME means only one disk, then I maybe have one disk wrong.

What do you think?

Thanks!
Carmen.

[Enrico P.]

I dont' know why the "HP LOGICAL VOLUME " output but the

/dev/dsk/c4t0d0

is the special file for the disk

and the s1 s2 s3 is for the partition in the same disk then for me you see one disk.

Enrico

[Carme Torca]

ok,
Thanks a lot of