System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Power Manager & HPUX 11.11 FOE

Jozef_Novak
Respected Contributor

HP Power Manager & HPUX 11.11 FOE

Hello,

does anyone know whether it is possible to run HP Power Manager on HPUX 11.11 Foundation Operating Environment ? The download page states that the Management Server and Remote agents are only supported on MCOE and I would like to know whether this is only a matter of support or the software will miss some dependencies that are included only with the MCOE. I would also like to know which was the last version of HPPM supporting HPUX 11.11 as a management server. The current version 4.2 lists only 11iv2 and v3 as supported platforms.

Many thanks,
Jozef
5 REPLIES
Steven E. Protter
Exalted Contributor

Re: HP Power Manager & HPUX 11.11 FOE

Shalom Jozef,

The 4.2 version will not work on HP-UX 11.11.

If this were an 11.23 or 11.31 server, it would be possible to buy the product individually and use it outside of the MCOE environment.

This is another of the little ways HP tries to use to nudge people into upgrading.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Torsten.
Acclaimed Contributor

Re: HP Power Manager & HPUX 11.11 FOE

AFAIR I installed version 4.0 and 4.1 on 11.11 and even the newer versions are supported on RISC machines, so I would simply give this a try.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jozef_Novak
Respected Contributor

Re: HP Power Manager & HPUX 11.11 FOE

Thank you guys for prompt responses.

Torsten, the newer versions (namely 4.2) are supported on PA-RISC machines, but only for 11.23 and 11.31, according to the documentation. And what about the MCOE requirement ? Do you think versions 4.1 and lower will run on FOE ?

Many thanks,
Jozef
Torsten.
Acclaimed Contributor

Re: HP Power Manager & HPUX 11.11 FOE

I don't think there is a difference regarding power manager - consider to try an install and you will see if it runs or not. I don't think you have other possibilities.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jozef_Novak
Respected Contributor

Re: HP Power Manager & HPUX 11.11 FOE

Advice provided.