Operating System - HP-UX
1748089 Members
5157 Online
108758 Solutions
New Discussion юеВ

Re: HP-UX 10.20 - fstab broken - no boot

 
Torsten.
Acclaimed Contributor

Re: HP-UX 10.20 - fstab broken - no boot

looks like you have a shell ...

run

/sbin/sh

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
restrok
Occasional Advisor

Re: HP-UX 10.20 - fstab broken - no boot

Still I can't write in console. I use Serial Console...

Does this have something to do with not being able to write in the console? 

Primary boot path: FWSCSI.6.0
Alternate boot path: SCSI.6.0
Console path: GRAPHICS(2) 
Keyboard path: USB

┬┐?

Interrupting the boot, and entering the part of "LanConfig" I saw that it is automatic. The team has a static IP. Does it have anything to do with the fstab and the nfs that I added?

restrok
Occasional Advisor

Re: HP-UX 10.20 - fstab broken - no boot

I was able to solve the problem.

- First was getting the nullmodem cable
- Then find the commands to enter the single user mode.
- When I started the console, I was not allowed to write. That's because with the PC I was using (Win10 and putty 64bits) it did not take the emulation of the terminal correctly. Using a computer with Win7 and a Putty version of 32bits worked correctly.

Thank you very much!