System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

HP-UX 11.31 can see FC HBA, but no LUNS/DIsk

hpjames
Established Member

HP-UX 11.31 can see FC HBA, but no LUNS/DIsk

Running HP-UX 11.31 (HP-UX B.11.31 U ia64 ) on rx2800 i4. Storage admin can see WWN number from Server HBA on switch and setup the zoning for the disk.  HP-UX server cannot see any LUNS or disks.

HBA Card:

# ioscan -funC fc

fc  0  0/0/0/3/0/0/0  fcd   CLAIMED     INTERFACE    HP SN1000Q 16Gb Dual Port PCIe Fibre Channel Adapter (FC Port  1)  /dev/fcd0
fc  1  0/0/0/3/0/0/1  fcd   CLAIMED     INTERFACE    HP SN1000Q 16Gb Dual Port PCIe Fibre Channel Adapter (FC Port  2)  /dev/fcd1

# fcmsutil /dev/fcd0

                           Vendor ID is = 0x1077
                           Device ID is = 0x2031
            PCI Sub-system Vendor ID is = 0x103C
                   PCI Sub-system ID is = 0x17E8
                               PCI Mode = PCI Express x8
                       ISP Code version = 6.7.2
                       ISP Chip version = 2
                               Topology = PTTOPT_FABRIC
                             Link Speed = 8Gb
                     Local N_Port_id is = 0x480023
                  Previous N_Port_id is = None
            N_Port Node World Wide Name = 0x51402ec000f3c469
            N_Port Port World Wide Name = 0x51402ec000f3c468
            Switch Port World Wide Name = 0x204d547fee6a4880
            Switch Node World Wide Name = 0x200a547fee6a4881
              N_Port Symbolic Port Name =  xxxxxxxxxxxx
              N_Port Symbolic Node Name = gnvpau01_HP-UX_B.11.31
                           Driver state = ONLINE
                       Hardware Path is = 0/0/0/3/0/0/0
                     Maximum Frame Size = 2048
         Driver-Firmware Dump Available = NO
         Driver-Firmware Dump Timestamp = N/A
                                   TYPE = PFC
                         NPIV Supported = YES
                         Driver Version = @(#) fcd B.11.31.1603 Dec  3 2015

 

ioscan -fnC disk shows no disk except for internal virtual disk and CDROM.

According to HP software depot, latest drivers are installed:

swlist | grep -i FibrChan
  FibrChanl-00          B.11.31.1003   FibreChannel;HW=A6795A,A5158A
  FibrChanl-01          B.11.31.1603   FibrChnl;HW=A6826A,A9782A,A9784A,AB378A/B,AB379A/B,AB465A,AD193A,AD194A,AD300A
  FibrChanl-02          B.11.31.1603   FCLP;HW=AD299A,AD355A,AD221A,AD222A,AD393A,AH402A,AH403A,403621-B21,456972-B21
  FibrChanl-03          B.11.31.1603   FCOC;HW=580151-B21,613433-001,AT111A
  FibrChanl-04          B.11.31.1303   FCQ;HW=P3P

 

# fcmsutil /dev/fcd0 vpd
                V I T A L   P R O D U C T   D A T A
                ---------   -------------   -------

 Product Description    : HP SN1000Q 16Gb 2P FC HBA

 Part number            : QW972A/B9F24A

 Engineering Date Code  : A-5610

 Part Serial number     : 8C9648144Y

 Misc. Information      : PW=18 Watts

 Mfd. Date              : 5648

 Mfd. ID                : HD8310405-18  K

 Check Sum              : 0x55

 Multiboot Version      : 020247

 EFI Version            : 06.13

 ROM Firmware version   : 6.7.2

 Asset Tag              : NA

 scsimgr lun_map  commands retruns no external LUNS.

Switch is a Nesux 5548UP with 8GB HBA and the storage is a PURE storage system. Any suggestions?

 

 

2 REPLIES
Torsten.
Acclaimed Contributor

Re: HP-UX 11.31 can see FC HBA, but no LUNS/DIsk

somehow i doubt that this array supports hp-ux. can you confirm?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
hpjames
Established Member

Re: HP-UX 11.31 can see FC HBA, but no LUNS/DIsk

Yes, this storage array supports HP-UX. We have other HP-UX systems that are using LUNS from the PURE storage array. The other servers are blade servers though.