System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

HP-UX 11i V3 on HP B2600 Workstation

SOLVED
Go to solution
Lecompte guillaume
Occasional Advisor

HP-UX 11i V3 on HP B2600 Workstation

Hello,

I would like to know if it's possible to run Hp-UX 11i V3 on HP B2600.(whith a quality pack, or upgrade B2600...).

If not, What kind of workstation run on HP-UX 11i V3.

Thanks in advance...

15 REPLIES
Keith Bryson
Honored Contributor
Solution

Re: HP-UX 11i V3 on HP B2600 Workstation

Sorry to say that v3 isn't supported on this workstation - see p44 here:

http://h18006.www1.hp.com/products/quickspecs/12079_na/12079_na.pdf

Hope that helps.
Arse-cover at all costs
Jupinder Bedi
Respected Contributor

Re: HP-UX 11i V3 on HP B2600 Workstation

check this doc

http://docs.hp.com/en/5992-3373/index.html
All things excellent are as difficult as they are rare
melvyn burnard
Honored Contributor

Re: HP-UX 11i V3 on HP B2600 Workstation

No workstations are supported for HP-UX 11iv3
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Sunny123_1
Esteemed Contributor

Re: HP-UX 11i V3 on HP B2600 Workstation

Hi

workstations are not supported for HP-UX 11iv3.


Regards
Sunny
Torsten.
Acclaimed Contributor

Re: HP-UX 11i V3 on HP B2600 Workstation

PA-RISC workstations are not only not supported, even not working with 11.31.

You may have more luck with Itanium workstations (also not supported, but maybe working).

Best would be to get an older Itanium server, e.g. rx2600 or 2620.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Lecompte guillaume
Occasional Advisor

Re: HP-UX 11i V3 on HP B2600 Workstation

OK, thanks for your answers !
Sunny123_1
Esteemed Contributor

Re: HP-UX 11i V3 on HP B2600 Workstation

Hi

If you got the solution then close this thread.

Regards
Sunny
Lecompte guillaume
Occasional Advisor

Re: HP-UX 11i V3 on HP B2600 Workstation

ok, I have an another question,

So, There is another workstation on PA-RISC architecture (HP C8000).

This workstation run on HP-UX 11i V2 but I don't know if this workstation is supported by HP ? is it obsolete ?

Thanks...
Torsten.
Acclaimed Contributor

Re: HP-UX 11i V3 on HP B2600 Workstation

The C8000 was sold until end of 2008 (IIRC) and is supported with 11.11 only.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sunny123_1
Esteemed Contributor

Re: HP-UX 11i V3 on HP B2600 Workstation

Hi

The C8000 is supported with HP-UX 11.11 only.


Regards
Sunny
Lecompte guillaume
Occasional Advisor

Re: HP-UX 11i V3 on HP B2600 Workstation

Actually, HP told me there is no workstation based on Itanium. and the PA-RISC architecture is not supported for HP-UX 11i v2.

HP-UX 11i v3 run only on server.

I am in a deadlock, because I can't change the type of OS (exclusively HP-UX), porting software is too complex.

The new generation of workstation runs on Linux or Windows.

then what ?...


Olivier Masse
Honored Contributor

Re: HP-UX 11i V3 on HP B2600 Workstation

There is an "office friendly" version of the rx2660 which is targeted for people who need to install it under a desk. Instead of being rackmount, it is installed on a pedestal, and has fans that are quieter. You can hook up a keyboard and mouse to it. It's as close as you can get to a workstation to run HP-UX.

Be sure to specify your need to your HP rep to ensure you get the right components. For example, you will need to add a graphics card as it doesn't come with any by default.

Olivier.



Lecompte guillaume
Occasional Advisor

Re: HP-UX 11i V3 on HP B2600 Workstation

The rx2660 could be a solution for my problem...

Thanks to everybody !

I close this thread... bye !
Dennis Handly
Acclaimed Contributor

Re: HP-UX 11i V3 on HP B2600 Workstation

>porting software is too complex.

Do you really need a workstation?
Can you run on a server and just display on a windows box?

>The rx2660 could be a solution for my problem

If you care about performance and Aries is too slow, you will have to recompile your application on Integrity.
Lecompte guillaume
Occasional Advisor

Re: HP-UX 11i V3 on HP B2600 Workstation

thanks for this answers...

have a good day, bye !