1753766 Members
5717 Online
108799 Solutions
New Discussion юеВ

Re: HP-UX Daemons

 
Elamparithi.P
Occasional Contributor

HP-UX Daemons

What are all the four important Daemons in HP-UX 11iv3?

Boot Sequence of HP-UX 11iv3
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: HP-UX Daemons

Everyone will tell you another set of 4 important daemons ...


This is part of a quiz, right?
Where are answers A, B, C and D?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Bijeesh
Respected Contributor

Re: HP-UX Daemons

Hi,
The below link will provide good HP doc for the boot process of hpux servers.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02281495/c02281495.pdf
Laurent Menase
Honored Contributor

Re: HP-UX Daemons

the question is the equivalent to :
what are all the four important part of a Ferari?
Some will say only the color

Most will say the engine
the logo?
the door?
the seats?
......

you mean in single user mode? Else there are more than 4 or less than 4.
we can tell
swapper
init
vhand
statdaemon

but why stop there if you want to really know, just start the system in single user mode, then do a 'ps -aef', you will get almost what is necessary for the system to run.


Kernel or user level daemon?

ps -aef |sort can give you an idea of important daemons