HP-UX Printer IP Address Change

[NIGEL WHITE_2]

Hello,

Just been advised one of my Network Printers needs to move to another floor in the building. Its moving to a floor point on the same same subnet, so I guess it's just a case of changing the address in SAM and Stop/Start the scheduler???

Or are there other thing to do before the Printer knows the new IP?

This is what I plan to do:

#lpshut
SAM
Change Printer IP Address
EXIT SAM
#lpshed

Go to lunch.

Can someone please advise.

Regards
Nigel

[Steven E. Protter]

Shalom,

No, I think you have a good plan.

Just make sure any routers or switches between the server and the printer don't block the ports you need to print.

SEP

[NIGEL WHITE_2]

Thanks.

Are there any options with lpshut I need to use?

R.
Nigel

[NIGEL WHITE_2]

Hi,

If I need to change the IP address of a Physical Printer, where do I make the change? Just looked in SAM and there's no options for the printer IP address. Do I just make the change in /etc/hosts??? Thats the only place I can see the IP address for my printer.

BTW, I've never setup a printer in HP-UX, so I could be looking in the wrong place.

HELP.

R.
Nigel

[Aneesh Mohan]

Hi Nigel,

I hope JetDirect has there in your box ,please do the below steps for changing the IP address of the existing network printer.


/opt/hpnpl/admin/hppi

Select option 1

Select Option 3

select Option 3---Change IP address

Select 0 --to save



Thanks ,
Aneesh

[NIGEL WHITE_2]

Well you learn somrthing new every day with HP-UX.

Is this a printer tool? I thought SAM was the one and only?

Never setup a printer in HPUX. Do I have to stop the scheduler before I run this ?

R.
Nigel

[Aneesh Mohan]

Hi Nigel ,

I use to do directly without lpshut .:) ..but better if you can use lpshut before this and lpsched after the changes.

/Aneesh

[NIGEL WHITE_2]

Thanks dude, I think the move has taken place as I have just received an email saying "Paper JAM" for the printer.

Better make that change.

Thanks again.

Regards
Nigel

[NIGEL WHITE_2]

Hi,

I see the Printer when I choose option3 - but no further options to change IP address???

Here's my output:

I N V E N T
****************************************************************

1) Spooler Administration (super-user only)


2) JetDirect Configuration (super-user only)
- TCP/IP configurable parameters

3) Diagnostics:
- diagnose printing problems


?) Help q) Quit

Please enter a selection (q - quit): 1

****************************************************************
*****] ****
**** ] **** JetDirect Printer Installer for UNIX
**** ]]]]] ]]]]] **** Version E.10.18
**** ] ] ] ] ****
**** ] ] ]]]]] **** Spooler Administration
***** ] ****
****** ] **** User: (root) OS: (HP-UX B.11.11)
I N V E N T
****************************************************************

Spooler:
1) Add printer to local spooler
2) Delete printer from local spooler
3) Modify existing spooler queue(s)
4) Install New Model Script
5) Remove Model Script

?) Help q) Quit

Please enter selection: 3

Currently configured HP network print queues:
-----------------------------------------------
pt180 pt205 pt205 pt231
pt183


Enter the lp destination name (q - quit):

pt205 is what I need to change, so what do I do now? I typed pt205 and no further options appeared???

QUESTION: Should I have used option2 first (TCP IP Settings) rather than option 1?

Regards
Nigel

[Aneesh Mohan]

Hi Nigel,


Can u check if there any requests pending on that printer and if yes the clear it and try again .

do "cancel -e printername" for clearing all pending request and do "lpstat printername " for checking

Please take care to assign points ,if my info helped u to rectify the issue :)