1753872 Members
7359 Online
108809 Solutions
New Discussion юеВ

Re: HP UX Reboot

 
Lee12
Occasional Advisor

HP UX Reboot

We have a development HP UX server
We have tried to shutdown/reboot with the following command
shutdown -r -y now
The shutdown worked but
we are now getting the message:
Loading.: HP-UX Primary Boot: 0/1/1/0.0xa04f083191b005b.0x0

Load of HP-UX Primary Boot: 0/1/1/0.0xa04f083191b005b.0x0 failed: Not Found

Press any key to continue


Followed by this


HP Smart Array 6400-128 Controller (version 2.80) 0 Logical Drives

1785-Drive Array Not Configured

No Drives Detected

Thanks in advance
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: HP UX Reboot

Looks like hp-ux 11.31. What server model is it? HP9000 or Integrity?
Do you know if you used the smartarray before?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Lee12
Occasional Advisor

Re: HP UX Reboot

I think that it is an Integrity machine
This is the first time we have tried a rebott so as far as I know we havent used smartarray before.
Thanks
Torsten.
Acclaimed Contributor

Re: HP UX Reboot

Please restart the server and record the output, attach and post.

Perform these commands from EFI:

# reconnect -r
# map -r
# devices
# drivers

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!