HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

HP-UX restore procedures

 
SOLVED
Go to solution
mmax
Valued Contributor

HP-UX restore procedures

Hello @ll
What're restore procedures after hp-ux restore on integrity systems? Is there some document about?
Thank you for help
8 REPLIES
Torsten.
Acclaimed Contributor

Re: HP-UX restore procedures

How did you restore?

Ignite/dd/fresh install + fbackup/...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
mmax
Valued Contributor

Re: HP-UX restore procedures

I made ignite restore
Torsten.
Acclaimed Contributor

Re: HP-UX restore procedures

So you need to check if you need to mirror your boot disk again and import other VGs.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
mmax
Valued Contributor

Re: HP-UX restore procedures

Are there all filesystems structures created as it's before backup?
Torsten.
Acclaimed Contributor
Solution

Re: HP-UX restore procedures

It depends on how did you take your backup.

Normally you backup the complete vg00 and you restore this to a single disk. This is the reason why you probably need to mirror these disks again.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
RUET
Regular Advisor

Re: HP-UX restore procedures

By default all file systems from the source system are restored by Ignite to the target system.
You can interrupt the ignite process to go to the ignite interface and modify fs structures if you want, but by default, jobs done by ignite is OK
Jozef_Novak
Respected Contributor

Re: HP-UX restore procedures

Unless the backup was not taken in an unusual way, you should not even need to import non-system VGs as the LVM configuration for all volume groups is kept in files within vg00.

J.
mmax
Valued Contributor

Re: HP-UX restore procedures

I don't have some /var structures like empty or other dirs and mirror root disks.