cancel
Showing results for 
Search instead for 
Did you mean: 

HP management home page

 
Sac_3
Frequent Advisor

HP management home page

Hi Frnds,

I tried to reset administrator/operator/user password for HP management home page via hp command line tools, however no luck. Need help

Below are the details:

OS version: Red Hat Enterprise Linux AS release 3 (Taroon Update 5)

System : ProLiant DL380 G4
ROM version : P51 12/02/2004
iLo present : Yes
Embedded NICs : 2
NIC1 MAC: 00:13:21:0b:4d:c9
NIC2 MAC: 00:13:21:0b:4d:c8

Processor: 0
Name : Intel Xeon
Stepping : 1
Speed : 3200 MHz
Bus : 800 MHz
Socket : 2
Level2 Cache : 1024 KBytes
Status : Ok

Processor: 1
Name : Intel Xeon
Stepping : 1
Speed : 3200 MHz
Bus : 800 MHz
Socket : 1
Level2 Cache : 1024 KBytes
Status : Ok

Processor total : 2

Memory installed : 4096 MBytes
ECC supported : Yes
PSP version: Version : 7.4.0


Below is the command i use to reset the administrator password to lab100

#/usr/local/hp/hpwebsetup -pA:lab100 -f


Regards,
SaC
3 REPLIES
Steven E. Protter
Exalted Contributor

Re: HP management home page

Shalom,

Try the systems root password.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
David Claypool
Honored Contributor

Re: HP management home page

SaC: SEP is correct. You are running PSP 7.4; the agents changed to OS authentication in 7.1.
Sac_3
Frequent Advisor

Re: HP management home page

Thx for the prompt reply.

I tried system root password. However, no luck. I tried restarting hpasm service as well.

What next..?

Regards,
SaC