HPE SN1100Q 16Gb 2p FC HBA

[hrvoje29]

Hello,

I have two DL360 gen9 servers, each with one HPE SN1100Q 16Gb 2p FC HBA. After installing the RedHat 7.2 I don't see fc_host class. Is it possible that qla2xxx version installed is not supporting the this HBA? Version of qla2xxx is 8.07.00.18.07.2-k.

Later, I tried to install new version of qla2xxx (kmod-qla2xxx-8.07.00.33.07.3_k-1.el7_2.x86_64.rpm)

# rpm -Uvh kmod-qla2xxx-8.07.00.33.07.3_k-1.el7_2.x86_64.rpm

Now, I can see my fc_hosts but links are down. Cables are plluged in. Are there any other steps that I should do except just installing the rpm?

Thank you. Regards,

Hrvoje

[JeroenKleen]

Hello Hrvoje,

Well I don't have any good explanation why this happened or how it seems a bit strange but my 1st thing that I would do myself would be review the SFP's installed (if they are properly supported with the card) and then update as well the FW on the card?
https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1008831758&swItemId=MTX_6cfead26048f4c278543396c77&swEnvOid=4184#tab-history

Maybe try this out 1st?
Cheers, jeroen

[turboexcesx]

Did you solve this? I have the same issue... still looking arround the web to fix it...