HPE Community
Operating System - HP-UX
1752288 Members
3403 Online
108786 Solutions
New Discussion

HPUX 11.00: Checking the System Firmware Levels

 
SOLVED
Go to solution
LG Porter
Frequent Advisor

‎08-04-2004 01:55 AM

‎08-04-2004 01:55 AM

HPUX 11.00: Checking the System Firmware Levels

I have several HP V Class servers as well as several K-Class, L-Class, N-Class servers that I need to check the firmware levels on. What command can I used to check the current firmware levels on these servers?
0 Kudos
Reply
1 REPLY 1
Jeff_Traigle
Honored Contributor

‎08-04-2004 02:04 AM

‎08-04-2004 02:04 AM

Solution

Re: HPUX 11.00: Checking the System Firmware Levels

Assuming you have OnlineDiag installed, the following will give you the PDC firmware version:

/usr/sbin/diag/contrib/pdcinfo -no_banner | grep Version
--
Jeff Traigle
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.