HPUX 11.11 - vpar not booting - failed ot open /stand/vmunix

[moonchild]

vpar A.03.01.05

when we try to boot the vpar from another active vpar we get:

[MON] vpar2 has halted.
Failed to open (7/0/2/1/0/4/1.0.0.0.0.0.0;)/stand/vmunix
Failed to load (1/0/2/1/0.4.1;)/stand/vmunix

attached is the vparextract -l output.

Thanks in advance

[Asif Sharif]

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1052740

[moonchild]

resetting the vpar panic's and the vpar toc is attached.

vparboot -p vpar2 -o "-lm" or "-lq" or from previous kernel

gives : vparboot: booting vpar please wait...
and on the console we see:

failed to open HW_PATH /stand/vmunix
failed to load HW_PATH /stand/vmunix

[MON]vpar2 has halted

[IT_2007]

Seems either hardware path is wrong or you boot disk is bad.

Was it up and running before reboot? What was the change?