cancel
Showing results for 
Search instead for 
Did you mean: 

Re: HPUX 11.23 not booting

 
SOLVED
Go to solution
Valued Contributor

Re: HPUX 11.23 not booting


fsck was successful in cleaning the rlvol1 filesystem. Don't use /dev/vg00/*, instead launch command for each rlvol.

Then try mounting the filesystem:

# mount /dev/vg00/lvol1 /test
Frequent Advisor

Re: HPUX 11.23 not booting

Yasir,
After running fsck on all logical volume and mounted all filesystem but the boot filesystem is some problem attached is the screenshots for that...! now how can I proceed...!
Valued Contributor

Re: HPUX 11.23 not booting


Try to take an ignite backup at this stage, skipping the boot partition only. If ignite is successful then you can rebuild your system.

If not, then wait for other people's suggestions.
Frequent Advisor

Re: HPUX 11.23 not booting

Now I can go to maintanance mode and single user mode but boot partition /stand is fails to mount, attach is the screenshot
Frequent Advisor

Re: HPUX 11.23 not booting

can i take ignite backup for the following path /dev/vg00/lv_oracle or can i use tar command
Valued Contributor

Re: HPUX 11.23 not booting


Try ignite first. I don't remember the exact syntax. You can take ignite of any mounted filesystem of vg00.

If it is not successful, then tar on tape would be your best option.