HPUX 11.31 SNMP CPU MEMORY STORAGE INFO

[mt_1299]

I currently have the default snmp agent working on our Itanium 64 bit HPUX 11.31 boxes, but I am not able to see cpu, memory, or storage information -- only interface and basic host details.

Will the default snmp agent provide this information? Do I need to install additional MIBs? What about net-snmp?

Thanks.

[avizen9]

Hello, Mike,
i believe yes snmp agent can provide cpu memory and storage info along with other useful info,


"Will the default snmp agent provide this information?"

Please refer below pdf which having detail info about this,

thanks,
http://docs.hp.com/en/B8844-90014/B8844-90014.pdf

[mt_1299]

I read through the pdf but I wasn't able to find resources explaining how to grab the information above independent of installing WLM.

[Court Campbell · Accepted solution]

You do not need any additional MIBS for these. The snmpd that ships with hpux is fine. You might search for hpux templates for cacti. The mibs you need should be in the template.