cancel
Showing results for 
Search instead for 
Did you mean: 

HPUX Boot issue

 
Jonathan Grymes
Frequent Advisor

HPUX Boot issue

Itanium 2660 HPUX 11.31

Shut the server down this morning to install additional memory.

Server attempts to start up but fails.

Loading.: HP-UX Primary Boot: 0/1/1/0.0x5000c50022e20ff9.0x0
Starting: HP-UX Primary Boot: 0/1/1/0.0x5000c50022e20ff9.0x0

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...efi_do_read: failed with status(Device Error)Start of HP-UX Primary Boot: 0/1/1/0.0x5000c50022e20ff9.0x0 failed: Device Error
Press any key to continue

 

 

5 REPLIES 5
Jonathan Grymes
Frequent Advisor

Re: HPUX Boot issue

Additioanl Info:

EFI Shell UEFI version 2.00 [14.62]
Device mapping table
fs0 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part1,SigA62B5158-A127-11E2-8000-D6217B60E588)
fs1 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part3,SigA62B519E-A127-11E2-8000-D6217B60E588)
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)
blk1 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)
blk2 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part1,SigA62B5158-A127-11E2-8000-D6217B60E588)
blk3 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part2,SigA62B518A-A127-11E2-8000-D6217B60E588)
blk4 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E20FF9,Lun0)/HD(Part3,SigA62B519E-A127-11E2-8000-D6217B60E588)
blk5 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000CCA00A61A515,Lun0)
blk6 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50005CA4F85,Lun0)
blk7 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000CCA00A62FF09,Lun0)
blk8 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E21035,Lun0)
blk9 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E1D951,Lun0)
blkA : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50022E1AC09,Lun0)
startup.nsh> echo -off

Torsten.
Acclaimed Contributor

Re: HPUX Boot issue

This looks good.

Now do

 

EFI> fs0:

EFI> cd EFI

...

and run the hpux boot loader.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
RajeshVarier
HPE Pro

Re: HPUX Boot issue

Let us see if you are able to boot in any mode using fs0:  like boot -lm etc

If not, suspect a disk issue and do not see any other boot disk.

I am a HPE Employee

Accept or Kudo

Jonathan Grymes
Frequent Advisor

Re: HPUX Boot issue

fs0:\> cd EFI

fs0:\EFI> hpux

(C) Copyright 1999-2012 Hewlett-Packard Development Company, L.P.
All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.047

Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...efi_do_read: failed with status(Device Error)Exit status code: Device Error

RajeshVarier
HPE Pro

Re: HPUX Boot issue

That looks like a disk issue. Could confirm by booting from a OS DVD or ignite  and check from recovery shell.

I am a HPE Employee

Accept or Kudo