HPUX V3 Boot Issue

[WADE S]

I have a system which mysteriously started crashing on the boot. The console errors are below. Am I able to recover without reinstalling?

Console is on Serial Device - via PCDP
Booting kernel...

0.30.40.5
Stored message buffer up to system crash:

MFS is defined: base= 0xe0000001028e4000 size= 100 KB
krs_find_files: The config.krs file was not found.
krs_find_files: The config.krs.lkg file was not found.
Found adjacent data tr. Growing size. 0x171c000 -> 0x571c000.
Loaded ACPI revision 2.0 tables.
MMIO on this platform supports Write Coalescing.
krs_find_files: The config.krs file was not found.
krs_find_files: The config.krs.lkg file was not found.


Using /stand/ext_ioconfig

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 7763 MB 7763 MB 7763 MB
Kernel : 7763 MB 7763 MB 7763 MB
User : 7091 MB 6286 MB 6311 MB
-------------------------------------------------------------------------

Starting ktracer 0 1
Installing Socket Protocol families AF_INET and AF_INET6 64000/0xfa00 esvroot Kernel EVM initialized
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
0 sba
0/0 lba
0/0/1/0 rmp3f01
0/0/1/1 rmp3f01
0/0/1/2 asio0
0/0/2/0 UsbOhci
NOTICE: USB device attached. Identification String:
Devices/Device/USB/Standard/hp/Unknown/0_1
<2.1.3.10.1008.4390.1>
0/0/2/0.0x0 UsbMiniBus
0/0/2/0.0 UsbMiniBus
NOTICE: USB device attached. Identification String:
Devices/Keyboard/USB/Boot/hp/Unknown/0_1
<2.305.3.100.1008.4390.1>
0/0/2/0.0x0.0x0 UsbBootKeyboard
0/0/2/0.0.0 UsbBootKeyboard
NOTICE: USB device attached. Identification String:
Devices/Mouse/USB/Standard/hp/Unknown/0_1
<2.307.3.10.1008.4390.1>
0/0/2/1 UsbOhci
0/0/2/2 UsbEhci
0/0/4/0 gvid_core
0/1 lba
0/2 lba
0/3 gh2p
0/3/0/0 PCItoPCI
0/3/0/0/0 pci_slot
0/4 gh2p
0/4/0/0 PCItoPCI
0/4/0/0/0 pci_slot
0/5 gh2p
0/5/0/0 PCItoPCI
0/5/0/0/0 pci_slot
120 processor
121 processor
250 pdh
250/0 ipmi
250/1 asio0
250/2 acpi_node
gio: Error configuring root device using EFI hw paths

System Console is on the Built-In Serial Interface AF_INET socket/streams output daemon running, pid 35
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
Swap device table: (start & size given in 512-byte blocks)
entry 0 - auto-configured on root device; ignored - can't open device
WARNING: No swap device configured, so dump cannot be defaulted to primary swap.
WARNING: No dump devices are configured. Dump is disabled.
mountfs:opend
VFS_MOUNTROOT error information:
0:(hfs) 6
1:(nfs) 223
6:(DevFS) 251
10:(vxfs) 6
11:(nfs3) 223
12:(nfs4) 223
13:(autofs) 251
16:(dnlc_neg_fs) 251

Message buffer contents after system crash:

panic: VFS_MOUNTROOT: READ_ONLY: all VFS_MOUNTROOTs failed: NEED DRIVERS ?????
Stack Trace:
IP Function Name
0xe0000000020bac80
0xe000000001783e60
0xe0000000020ac8e0
End of Stack Trace

linkstamp: Fri Apr 04 04:11:59 EDT 2008
_release_version: @(#) $Revision: vmunix: B.11.31_LR FLAVOR=perf
Calling function e0000000018780e0 for Shutdown State 1 type 0x2
i 0 pfn 0x1 pages 0x9f
i 1 pfn 0x100 pages 0x3dc2e
i 2 pfn 0x3e19a pages 0x38e
i 3 pfn 0x3fc00 pages 0x134
i 4 pfn 0x3fd38 pages 0x1e
i 5 pfn 0x3fd7e pages 0x6
i 6 pfn 0x3fde6 pages 0x6
i 7 pfn 0x100000 pages 0x100000
i 8 pfn 0x10040000 pages 0xbf1fe
i 9 pfn 0x100ff200 pages 0xe00
*** Not enough CPUS for a compressed dump ***

*** A system crash has occurred. (See the above messages for details.)
*** The system is now preparing to dump physical memory to disk, for use
*** in debugging the crash.

ERROR: No dump space is configured. Physical memory will not be dumped.
ERROR: Configured dump space is insufficient to hold dump metadata.
Physical memory will not be dumped.

***********************************************************
* ROM Version : 04.02
* ROM Date : 03/09/2008
* BMC Version : 05.30
***********************************************************
0 0 0x0015B2 0x0000000016234273 boot time event
1 0 0x0000A4 0x0000000000000000 start memory configuration

[Torsten.]

"Error configuring root device using EFI hw paths"

What server model is it?

Could be a firmware issue ...

[Steven E. Protter]

Shalom,

Looks like either a bad disk or a firmware issue.

Did the system work before? If so, what changed?

Check the event logs in the GSP/ilo card for more information.

SEP

[WADE S]

It's a BL870c blade server. It was up and running. Someone may have updated the FW. How would I undo that if that's the case?

[Torsten.]

Looks similar to a rx2620, but not exactly.

What is it?

I cannot see any disk in the output.

What do you get from EFI?

Shell> reconnect -r
Shell> map -r
Shell> decives
Shell> info all

[Tim Nelson]

I am not challenging that a FW update went bad if that is what happened.

The messages looks to me like a corrupt or failing boot disk ( cannot find swap, cannot find drivers ). or maybe someone whacked a bunch of OS files.

Is there a Mirror you can boot from ?

otherwise try to boot your ignite image which I am sure you have ?

or IF a FW update was done and now the system will not boot then HP probably needs to be involved if a backrev is possbible

Or reapply the FW update if possible ??

[Torsten.]

cross-posting ...



OK, it's the monster blade ;-)

There is no new firmware on the web currently.

Ask him, what he has done.

Anyway, try the commands above.

[Torsten.]

Post the result of

Shell> bcfg dump boot

together with the other results!

[WADE S]

You're correct, it's one of the big blades.
Here's the output.

Loading.: EFI Shell [Built-in]
EFI Shell UEFI version 2.00 [14.62]
Device mapping table
fs0 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)/HD(Part1,Sig39A94A6C-01F9-11DD-8000-D6217B60E588)
fs1 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)/HD(Part3,Sig39A94AC6-01F9-11DD-8000-D6217B60E588)
blk0 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)
blk1 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)/HD(Part1,Sig39A94A6C-01F9-11DD-8000-D6217B60E588)
blk2 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)/HD(Part2,Sig39A94AB2-01F9-11DD-8000-D6217B60E588)
blk3 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)/HD(Part3,Sig39A94AC6-01F9-11DD-8000-D6217B60E588)
blk4 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE150087838,Lun4001000000000000)
blk5 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE150057FB8,Lun4001000000000000)
blk6 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE150087839,Lun4001000000000000)
blk7 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE15008783C,Lun4001000000000000)
blk8 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE150057FBC,Lun4001000000000000)
blk9 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE15008783D,Lun4001000000000000)
blkA : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50060E8004295460,Lun0)
blkB : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50060E8004295460,Lun4000000000000000)
blkC : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50014380013C23ED,Lun4001000000000000)
blkD : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50014380013C23E9,Lun4001000000000000)
blkE : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50060E800562CA11,Lun0)
blkF : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50060E800562CA11,Lun4000000000000000)
blk10 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150087838,Lun4001000000000000)
blk11 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150057FB8,Lun4001000000000000)
blk12 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150087839,Lun4001000000000000)
blk13 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE15008783C,Lun4001000000000000)
blk14 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150057FBC,Lun4001000000000000)
blk15 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE15008783D,Lun4001000000000000)
blk16 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50014380013C23ED,Lun4001000000000000)
blk17 : Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50014380013C23E9,Lun4001000000000000)
blk18 : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150087838,Lun4001000000000000)
blk19 : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150057FB8,Lun4001000000000000)
blk1A : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150087839,Lun4001000000000000)
blk1B : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE15008783C,Lun4001000000000000)
blk1C : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150057FBC,Lun4001000000000000)
blk1D : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE15008783D,Lun4001000000000000)
blk1E : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50014380013C23ED,Lun4001000000000000)
blk1F : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50014380013C23E9,Lun4001000000000000)
blk20 : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50060E800562CA31,Lun0)
blk21 : Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50060E800562CA31,Lun4000000000000000)
startup.nsh> echo -off

setting hpux path(\EFI\HPUX)...
type 'fs[x]:' where x is your bootdisk (0, 1, 2...)
type 'hpux' to start hpux bootloader
Shell> devices
C T D
T Y C I
R P F A
L E G G #P #D #C Device Name
== = = = == == == =============================================================
10 R - - - 1 7 Acpi(HWP0002,PNP0A03,0)
11 R - - - 1 2 Acpi(HWP0002,PNP0A03,100)
12 R - - - 1 3 Acpi(HWP0002,PNP0A03,200)
13 R - - - 1 3 Acpi(HPQ0002,PNP0A08,300)
14 R - - - 1 3 Acpi(HPQ0002,PNP0A08,400)
15 R - - - 1 3 Acpi(HPQ0002,PNP0A08,700)
1A D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
1B D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
1C B - - 1 1 1 Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
1D B - - 1 2 2 Usb Open Host Controller
1E D - - 1 2 - Usb Open Host Controller
1F D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(2|2)
20 B - - 1 5 2 Acpi(HWP0002,PNP0A03,0)/Pci(4|0)
21 B X X 1 1 1 Acpi(HWP0002,PNP0A03,100)/Pci(1|0)
22 B X X 1 1 1 Acpi(HWP0002,PNP0A03,100)/Pci(1|1)
24 B X X 1 1 1 LSI Logic SAS Controller
25 B X X 1 1 1 Acpi(HWP0002,PNP0A03,200)/Pci(2|0)
26 B X X 1 1 1 Acpi(HWP0002,PNP0A03,200)/Pci(2|1)
29 D - - 1 - - Acpi(HPQ0002,PNP0A08,300)/Pci(0|0)
2A D X X 1 2 - PCIe 4Gb Fibre Channel Port (Port 1)
2B D X X 1 2 - PCIe 4Gb Fibre Channel Port (Port 2)
2E D - - 1 - - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)
2F B X X 1 2 12 PCIe 4Gb Fibre Channel Port (Port 1)
30 B X X 1 2 8 PCIe 4Gb Fibre Channel Port (Port 2)
33 D - - 1 - - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)
34 D X X 1 2 - PCIe 4Gb Fibre Channel Port (Port 1)
35 B X X 1 2 10 PCIe 4Gb Fibre Channel Port (Port 2)
4B D - - 2 - - Primary Standard Error Device
4C D - - 2 - - Primary Console Input Device
4D D - - 2 - - Primary Console Output Device
52 B - - 1 1 1 16550 Serial UART
53 B - - 1 5 3 VT-100+ Serial Console
54 B X - 1 3 1 Generic Usb Keyboard
55 D - - 1 - - Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Usb(0, 1)
72 B X X 1 2 3 HP DH036ABAA5 HPD0
73 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE150087838,Lun4001000000000000)
74 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE150057FB8,Lun4001000000000000)
75 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE150087839,Lun4001000000000000)
76 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE15008783C,Lun4001000000000000)
77 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE150057FBC,Lun4001000000000000)
78 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50001FE15008783D,Lun4001000000000000)
79 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50060E8004295460,Lun0)
7A D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50060E8004295460,Lun4000000000000000)
7B D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50014380013C23ED,Lun4001000000000000)
7C D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50014380013C23E9,Lun4001000000000000)
7D D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50060E800562CA11,Lun0)
7E D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)/Fibre(WWN50060E800562CA11,Lun4000000000000000)
7F D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150087838,Lun4001000000000000)
80 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150057FB8,Lun4001000000000000)
81 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150087839,Lun4001000000000000)
82 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE15008783C,Lun4001000000000000)
83 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150057FBC,Lun4001000000000000)
84 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE15008783D,Lun4001000000000000)
85 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50014380013C23ED,Lun4001000000000000)
86 D X X 1 1 - Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)/Fibre(WWN50014380013C23E9,Lun4001000000000000)
87 D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150087838,Lun4001000000000000)
88 D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150057FB8,Lun4001000000000000)
89 D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150087839,Lun4001000000000000)
8A D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE15008783C,Lun4001000000000000)
8B D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE150057FBC,Lun4001000000000000)
8C D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50001FE15008783D,Lun4001000000000000)
8D D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50014380013C23ED,Lun4001000000000000)
8E D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50014380013C23E9,Lun4001000000000000)
8F D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50060E800562CA31,Lun0)
90 D X X 1 1 - Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)/Fibre(WWN50060E800562CA31,Lun4000000000000000)
91 D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704)
92 D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704)
93 D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704)
94 D X X 1 3 - Broadcom NetXtreme Gigabit Ethernet (BCM5704)
D3 D - - 1 2 - FAT File System [FAT32] 499 MB
D4 D - - 1 1 - Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)/HD(Part2,Sig39A94AB2-01F9-11DD-8000-D6217B60E588)
D5 D - - 1 2 - FAT File System [FAT32] 400 MB

Shell> info all

SYSTEM INFORMATION

Date/Time: Jun 10, 2008 18:47:31 (20:08:06:10:18:47:31)
Manufacturer: hp
Product Name: server BL870c
Product Number: AH232
Serial Number: TWT47334AF
UUID: DE89A030-A9E1-11DC-9F46-4D8ECB6EB2BA
System Bus Frequency: 266 MHz

PROCESSOR MODULE INFORMATION

# of L3 L4 Family/
CPU Logical Cache Cache Model Processor
Module CPUs Speed Size Size (hex.) Rev State
------ ------- -------- ------ ------ ------- --- ------------
0 4 1.42 GHz 6 MB None 20/01 A1 Active

CPU threads are turned on.


MEMORY INFORMATION

---- DIMM A ----- ---- DIMM B ----- ---- DIMM C ----- ---- DIMM D -----
DIMM Current DIMM Current DIMM Current DIMM Current
--- ------ ---------- ------ ---------- ------ ---------- ------ ----------
0 2048MB Active 2048MB Active 2048MB Active 2048MB Active
1 ---- ---- ---- ----
2 ---- ---- ---- ----
3 ---- ---- ---- ----
4 ---- ---- ---- ----
5 ---- ---- ---- ----

Active Memory : 8192 MB
Installed Memory : 8192 MB


I/O INFORMATION


BOOTABLE DEVICES

Order Media Type Path
----- ---------- ---------------------------------------
1 HARDDRIVE Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)/HD(Part1,Sig39A94A6C-01F9-11DD-8000-D6217B60E588)
2 HARDDRIVE Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)/HD(Part3,Sig39A94AC6-01F9-11DD-8000-D6217B60E588)




Seg Bus Dev Fnc Vendor Device Slot
# # # # ID ID # Path
--- --- --- --- ------ ------ --- -----------
00 00 01 00 0x103C 0x1303 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
00 00 01 01 0x103C 0x1302 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
00 00 01 02 0x103C 0x1048 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
00 00 02 00 0x1033 0x0035 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|0)
00 00 02 01 0x1033 0x0035 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|1)
00 00 02 02 0x1033 0x00E0 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|2)
00 00 04 00 0x1002 0x515E XX Acpi(HWP0002,PNP0A03,0)/Pci(4|0)
00 01 01 00 0x14E4 0x16A8 XX Acpi(HWP0002,PNP0A03,100)/Pci(1|0)
00 01 01 01 0x14E4 0x16A8 XX Acpi(HWP0002,PNP0A03,100)/Pci(1|1)
00 02 01 00 0x1000 0x0054 XX Acpi(HWP0002,PNP0A03,200)/Pci(1|0)
00 02 02 00 0x14E4 0x16A8 XX Acpi(HWP0002,PNP0A03,200)/Pci(2|0)
00 02 02 01 0x14E4 0x16A8 XX Acpi(HWP0002,PNP0A03,200)/Pci(2|1)
00 03 00 00 0x103C 0x403B XX Acpi(HPQ0002,PNP0A08,300)/Pci(0|0)
00 04 00 00 0x1077 0x2432 01 Acpi(HPQ0002,PNP0A08,300)/Pci(0|0)/Pci(0|0)
00 04 00 01 0x1077 0x2432 01 Acpi(HPQ0002,PNP0A08,300)/Pci(0|0)/Pci(0|1)
00 05 00 00 0x103C 0x403B XX Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)
00 06 00 00 0x1077 0x2432 02 Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|0)
00 06 00 01 0x1077 0x2432 02 Acpi(HPQ0002,PNP0A08,400)/Pci(0|0)/Pci(0|1)
00 07 00 00 0x103C 0x403B XX Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)
00 08 00 00 0x1077 0x2432 03 Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|0)
00 08 00 01 0x1077 0x2432 03 Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|1)



Fast initialization: Enabled
MPS optimization: Disabled
System Wake-On-LAN: Enabled

BOOT INFORMATION

Monarch CPU:

Current Preferred
Monarch Monarch
CPU CPU
Module/ Module/
Logical Logical Warnings
------- --------- --------
0/0 0/0

AutoBoot: ON - Timeout is : 7 sec

Boottest:

BOOTTEST Settings Default Variable

Selftest Setting
--------- --------------
early_cpu Run this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test

LAN Address Information:

LAN Address Path
----------------- ----------------------------------------
*Mac(001B787CF10C) Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(001B787CF10C)
Mac(001B787CF10D) Acpi(HWP0002,PNP0A03,100)/Pci(1|1)/Mac(001B787CF10D)
Mac(001B787CF10E) Acpi(HWP0002,PNP0A03,200)/Pci(2|0)/Mac(001B787CF10E)
Mac(001B787CF10F) Acpi(HWP0002,PNP0A03,200)/Pci(2|1)/Mac(001B787CF10F)


FIRMWARE INFORMATION


System Firmware A Revision: 3.11 [4743]
*System Firmware B Revision: 4.02 [4810]
PAL_A: 7.31/1.08
PAL_B: 1.14
EFI Spec: 2.00
EFI Intel Drop: 14.62
EFI Build: 7.11
SAL Spec: 3.20
SAL_A: 2.00
SAL_B: 4.02
POSSE: 0.24
ACPI: 7.00
SMBIOS: 2.3.2a
BMC Revision: 5.30
IPMI: 1.00
Management Processor Revision: T.03.04
Updatable EFI Drivers:
Floating-Point Software Assistance Handler: 00000118
Broadcom Gigabit Ethernet Driver: 00090404
SCSI Bus Driver: 00000031
SCSI Disk Driver: 00000020
SCSI Tape Driver: 00000030
Usb Ohci Driver: 00000040
USB Bus Driver: 00000020
USB Bot Mass Storage Driver: 00000020
Generic USB Mass Storage Driver: 00000020
CLPrelay App: 00000100

* Indicates active system firmware image

WARNING AND STOP BOOT INFORMATION

Warning[10]: BMC System Event Log is full

CHIP REVISION INFORMATION

Chip Logical Device Chip
Type ID ID Revision
------------------- ------- ------ --------
Memory Controller 0 4032 0020
Root Bridge 0 4030 0020
Host Bridge 0000 122e 0032
Host Bridge 0001 122e 0032
Host Bridge 0002 122e 0032
Host Bridge 0003 4037 0022
Host Bridge 0004 4037 0022
Host Bridge 0007 4037 0022
Other Bridge 0 0 0030
Other Bridge 0 0 5007
Baseboard MC 0 0 0530


SYSTEM SECURITY CONFIGURATION
Trusted Boot: Not Supported
TPM: Not Present


Shell> bcfg dump boot
The boot option list is:
01. Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr5000C50000F070C5,Lun0)/HD(Part1,Sig39A94A6C-01F9-11DD-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI "HP-UX Primary Boot: 0/2/1/0.0x5000c50000f070c5.0x0"
02. Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(001B787CF10C) "Core LAN Port 1"
03. Acpi(HWP0002,PNP0A03,100)/Pci(1|1)/Mac(001B787CF10D) "Core LAN Port 2"
04. Acpi(HWP0002,PNP0A03,200)/Pci(2|0)/Mac(001B787CF10E) "Core LAN Port 3"
05. Acpi(HWP0002,PNP0A03,200)/Pci(2|1)/Mac(001B787CF10F) "Core LAN Port 4"
06. VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9) "EFI Shell [Built-in]"
07. Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Usb(0, 2) "iLO Virtual Media"

Shell>

[Torsten.]

Looks like there are 2 bootable internal sas drives.

Try

Shell> fs1:

fs1:\> cd efi

fs1:\EFI> cd hpux

fs1:\EFI\HPUX> hpux

for both, fs1 and fs0!