Operating System - HP-UX
1745797 Members
3707 Online
108722 Solutions
New Discussion юеВ

HPUX kernel parameters administration

 
Roquevalder C. Oliveira
Occasional Contributor

HPUX kernel parameters administration

Hi,
I would like to know if there is an HPUX command to show some kernel parameter values usage, like current usage, High water mark, how many HWM achieving, for semaphores, shared memory, nfiles, and so on.
Thanks for any help.
Roque.
5 REPLIES 5
Robert-Jan Goossens_1
Honored Contributor

Re: HPUX kernel parameters administration

Hi,

# kmtune -l or -q name_of_the_parameter

Regards,
Robert-Jan
Pete Randall
Outstanding Contributor

Re: HPUX kernel parameters administration

Much of this information is available in Glance's System Tables Report.


Pete

Pete
Roquevalder C. Oliveira
Occasional Contributor

Re: HPUX kernel parameters administration

Hi,
For this kind of data: usage, hwm, kmtune is not suitable. I don├В┬┤t have glance installed. Even though, is it possible to use its tables ?
Thanks,
Roqu
Florian Heigl (new acc)
Honored Contributor

Re: HPUX kernel parameters administration

kmtune get's You all the upper boundaries, but unfortunately I don't know many commands for the current usage.
ipcs for shmmem, swapinfo, hmmm... :)

there is a trial version of glance available if You need the results fast.

otherwise I'd try to use rrdtool/mrtg and get the neccessary values out of the snmp mib. (this not being the direct, logical way, but it should get You most data You search.)
yesterday I stood at the edge. Today I'm one step ahead.
Roquevalder C. Oliveira
Occasional Contributor

Re: HPUX kernel parameters administration

I will try kcweb as suggested in another msg.