HPE Community
Operating System - HP-UX
1752805 Members
5536 Online
108789 Solutions
New Discussion юеВ

Re: Help required on HP-UX paramters

 
Gabbi
Occasional Contributor

тАО02-14-2010 07:48 PM

тАО02-14-2010 07:48 PM

Help required on HP-UX paramters

Hi,

We need to check and set the below recommendation as per our Customer Checklist on HP-UX 11.31 Servers

1- Native I/O enabled? -> Yes
2- Ratio of MSIs/cores -> 1 MSI per core for HP-UX

Could you please let us know how to check and set these parameters?

Thanks
Singh
0 Kudos
Reply
3 REPLIES 3
Sachin Kumbla
Frequent Advisor

тАО02-14-2010 11:56 PM

тАО02-14-2010 11:56 PM

Re: Help required on HP-UX paramters

Hi

If you are relating it to native multipathing then there is a command called

scsimgr

In man pages of scsimgr you can find diff. options.

Rgds.,
Sachin Kumbla
0 Kudos
Reply
SoorajCleris
Honored Contributor

тАО02-15-2010 01:12 AM

тАО02-15-2010 01:12 AM

Re: Help required on HP-UX paramters

This may help you to understand more about Native multipathing

docs.hp.com/en/native-multi-pathing/native_multipathing_wp.pdf

Regards,
Sooraj

"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie
0 Kudos
Reply
Gabbi
Occasional Contributor

тАО02-15-2010 01:33 AM

тАО02-15-2010 01:33 AM

Re: Help required on HP-UX paramters

Hi,

Thanks for your reply.It is not clear from your suggestions and answers.
We want to know how to check and set the below two parameters on HP-UX ? Pls help

1- Native I/O enabled? -> Yes
2- Ratio of MSIs/cores -> 1 MSI per core for HP-UX

Thanks,
Singh
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.